Quote Originally Posted by fadetoblack View Post
hmm. so your temps arent static in 903? and were you seeing static temps in prev versions?
They were static, but seemed high. I had to reseat my Ultra-120 just to be sure, and I did it with a Loonie (Canadian dollar coin) and it's solid as hell now.

The temps I get are pretty consistent, but 8 -10 degrees higher in PC Probe than in CoreTemp

Quote Originally Posted by Grnfinger View Post
What were your temps at 4.0GHz and what voltage?

I see about 38 on idle / 58-61 load @ 3.6GHz with 1.48 volts

I have a wood stove so my room is rather warm ...25 celcius
At 4.0 I had 45 degrees idle and as high as 69 under moderate load, but it wasn't stable. Voltage was 1.49.

I could run 3DMark06 but not OCCT. OCCT got me a BSOD.

Anyway, I am running at 3.6 quite stable at 1.44v around the same temp on PC Probe of 45 idle and 65-70 load.

I haven't done CoreTemp yet, because I have to reboot and disable driver signing on my Vista 64, which causes my G15 LCD not to work for some reason....