Quote Originally Posted by mc2k View Post
Yea idd,

Quote from Lazy: I set the Vcore 1.41250 in bios and CPU-Z reads 1.4560 on idle and 1.44 on load

Did u enable Vcore control or sumtin, the option that is just like the Maximus ( loadline calibration),

hows on the P35 LP UT-T2R, vcore( vdroop) from idle to load?
Yes i did enable this feature in the bios.
Just starting to run Orthos right now running at 445*9 right now
Vcore = 1.456 / FSB VVT = 1.45 / NB = 1.47 (Smart Guardian/CPU-Z reading)

Initially once the computer was booted into windows, CPU-Z reported Vcore @ 1.476 but once on load it dropped down to 1.456
Additionally FSB VVT was set to 1.46 but drops to 1.45 and NB set to 1.5 drops to 1.47 on smart guardian.

Once again these are readings from a windows program so i can not say it is 100% correct

It will probably take some time to get this set-up stable so i might just skip this stage for now and try for max fsb on air
Quote Originally Posted by SNiiPE_DoGG View Post
i just want to point out that this thread has 2 stars and that needs fixing
Added my sta for it