Quote Originally Posted by didineedthis View Post
@marios

thank you for your prompt reply.

i have managed to over clock to 3.262

1450 (725) 9x but it is unstable and the system keeps restarting its self, can you have a look at my settings below and see if you can suggest anything to get it stable.

my temps were mid 30s idle but my motherboard was around 43?


regards
didineedthis
AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: No linkboost option here. Use 1303 BIOS
CPU Multi 9
FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1450
Actual FSB (QDR), Mhz: 1450
MEM (DDR), Mhz: 900
Actual MEM (DDR), Mhz: 900
Vcore Voltage:1.55 Start at 1.55 and try lower volts after success.
Memory Voltage:2.15
1.2v HT Voltage:Auto
NB Core Voltage:1.45
SB Core Voltage: auto
CPU VTT Voltage: auto
DDRII Controller Ref Voltage: +10 or auto
DDRII Channel A Ref Voltage: +10 or auto
DDRII Channel B Ref Voltage: +10 or auto

tCL (CAS Latency):
tRCD: AUTO
tRP: AUTO
tRAS: AUTO
Command Per Clock (CMD): AUTO


Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Enabled security
Virtualization Technology: Enabled makes no OC diffenerce
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: Auto defaults at 200

SLI mem disabled

Did you check your dimms with a bootable vista dvd ?
No large fan can replace a small fan on top of each cooler (NB, and two mosfets)