Striker pwns EVGA with Q6600 G0

[didineedthis]

@marios

thank you for your prompt reply.

i have managed to over clock to 3.262

1450 (725) 9x but it is unstable and the system keeps restarting its self, can you have a look at my settings below and see if you can suggest anything to get it stable.

my temps were mid 30s idle but my motherboard was around 43?



AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: No linkboost option here. Use 1303 BIOS
CPU Multi 9
FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1450
Actual FSB (QDR), Mhz: 1450
MEM (DDR), Mhz: 725
Actual MEM (DDR), Mhz: 725
Vcore Voltage:1.38125
Memory Voltage:2.0
1.2v HT Voltage:1.55
NB Core Voltage:1.45
SB Core Voltage: auto
CPU VTT Voltage:1.40 or even more
DDRII Controller Ref Voltage:
DDRII Channel A Ref Voltage:
DDRII Channel B Ref Voltage:

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 12
Command Per Clock (CMD): 2


Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Enabled security
Virtualization Technology: disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: Auto defaults at 200

regards
didineedthis