Lian Li v2000 and v1200 thread

[RockfordFosgate]

No temps are same.But Tj07 is very smaller than V2000

[outblast]

[QUOTE=RockfordFosgate;2562774]My new V2000B PlusII after TJ07




I could of swore I seen some where that a 3x120mm rad would fit at the bottom with 2 psu's installed. guess this verifies it. Congratulations on the build its looking very clean and awsome.

I need to get another rad in somewhere because of to many things in the loop. cpu,nb,2x8800gtx's whoh yea need to do something. I can boil water at this point.

[Eddietop]

Nice placement of that RAD. I'm interested in doing something like this myself as i would not have to mod the case. Is there much difference from say mounting the RAD externally?

[Frankenchrist]

Outblast, are those 80mm fans blowing on the rad or sucking air off it?

[Jon Boy Deluxe]

FIRSTLY - this is work in progress so ignore things like cable management, DearKook has 'inspired' me so I'll be making a few changes So go easy with the comments please. It will be very slick soon.

Atm I'm toying with a custom shroud for the PA120.3 in the style of the v1000 so I can CF a pair of 3870's.

Had to use the ones hosted at my other forum as I couldn't see an upload option here.


Things got a little tight...


I know, I know - CABLE MANAGEMENT! Res has also been topped up since and the kink worked out of one of the lines.

What do you think?

[disruptfam]

looks good man!!! i like that black coolant!!!

I would put the res somewhere else though if possible

[NoobCake]

I would mount the on the bottom of where the motherboard ends so its sits perfectly, one of these would make it look sleek:


http://www.performance-pcs.com/catal...ducts_id=21624

or you can get the 250mL one, mount that there it would look very nice

[Jon Boy Deluxe]

looks good man!!! i like that black coolant!!!

I would put the res somewhere else though if possible

Thank you. I know what you mean re the res but it is pretty tight in there, I'll look into moving that.

I would mount the on the bottom of where the motherboard ends so its sits perfectly, one of these would make it look sleek:


http://www.performance-pcs.com/catal...ducts_id=21624

or you can get the 250mL one, mount that there it would look very nice

Cheers for the input. I toyed with doing that and tbh I just might.

(If)When I get the 3870's in cf I'll be taking the gpu's out of the loop so there might be a bit more space...

I also saw a side mounted res on my other forum with a with a window cut out, hang on... Link I think that is pretty awesome.

Need to buy a dremel and do the cable management this weekend

[NoobCake]

OMG geeze that lin you sent, all i can say is WOW, geeze one of the sweetest setup's i have ever seen, i love the green LED's Im guessing that is one of the Antec ranges. How he placed the acrylic and Res that looks awesome

[Jon Boy Deluxe]

OMG geeze that lin you sent, all i can say is WOW, geeze one of the sweetest setup's i have ever seen, i love the green LED's Im guessing that is one of the Antec ranges. How he placed the acrylic and Res that looks awesome

I know, I was green with envy! I've been on that forum for a while and this new guy turns up with a god damn sweet setup! Fair play to him though... Ooops, think we're going off topic!

[varrius]

Changed it up a bit.

[Jedda]

Jon Boy,
The Fuzion is usually mounted with the outlet above the central inlet to avoid an air bubble that can otherwise form inside.
Your's is inverted.
Nice build!
V-Series Rule!

[pet168]

heres my V1000 Mod

rebadged as "R1000 Redline"

[kinghong1970]

Daaaaaaamn!!!

i think i'd like to get my wife's Lian Li Case and paint it now...

[CERO]

Hey guys, I am planning to get one of these cases for my second build, but does the drive cage really "sucks" as I heared they are vibrating when drives are installed causing the hole case is resonating thus noisy:X

[bizkit35461]

I'm also going to be using a V2000 for a second build, and was wondering what gripes all of you have. [and how did you solve any of these?]
Thanks!
~R4z3rsPar4d0x~

[Budious]

Great paint job... looking at your pics, I'm tempted to do the same with my V1000

[Bl4ck^!]

I'm also going to be using a V2000 for a second build, and was wondering what gripes all of you have. [and how did you solve any of these?]
Thanks!
~R4z3rsPar4d0x~

excuse moi but what is a "gripe" ?

Very nice RED LI V1000 : ] Pet168

[pet168]

tnx guys. ill update my pics as soon my upgrades and more modifications are done

[bizkit35461]

excuse moi but what is a "gripe" ?

Very nice RED LI V1000 : ] Pet168

Gripe means to complain naggingly or constantly; grumble. Etc. So put simply, something that you dislike or that has caused problems for you.

[Frankenchrist]

No intake fan in the top chamber by default, the large hole for wire routing in the floor of the top chamber is next to the side panel instead of right under the motherboard, could use more room behind the mobo.
Does anyone have any answers to these questions that I posted earlier in the thread?

Here's a couple of questions for the v1000 & 2000 owners. I have this case:
http://www.xoxide.com/lian-li-pc-v2000aw-plus-2.html
1. Which way do you have the fan oriented that's mounted by the pci slots?
2. Which way do you have your PSU mounted in the lower chamber?
3. Or which way do you think they both should be mounted to keep things the coolest?

I have 1 intake fan on the lower and upper chambers on the front of the case, 2 80mm exhaust fans in the PSU chamber, and 1 exhaust fan behind the CPU and the PCI slot/side panel fan.
I have also figured out that by removing the black mesh that they ship on the rear fan, my cpu temp seems to have dropped by between 1 and 2 degrees. It's not much but it's something.

Outblast, are those 80mm fans blowing on the rad or sucking air off it?

[fyseni]

I'm thinking about getting the PC-101B case, but I hate those plastic-clip using HDD racks on them as I've read they don't dampen HDD vibration at all.
So I was wondering if anyone knew if the racks can be replaced (without modding involving dremels and jigsaws, I can deal with a few screws and a drill though) with the racks found in the newer Lian Li PC-7 SE III (pic) and PC-A08 (pic) cases? Is it even possible to purchase the racks separately? Thanks in advance.

[S1mon-]

I just got my V2000B and it's huge! The space management is sick inside so much space and really ingenious equipment! I'll post some pic soon

Too bad I can't find a place in Canada to buy the windowed panel that would be great

[gastoncapo]

im getting mine tomorrow (according to ups)!! Lian Li PC-V2000B PLUS II Aluminum Full Tower Case with Custom Full View Window, modded from performance-pcs with the windowed panel on the side and modded cables inside!! cant ing wait!!!!!!

[disruptfam]

AWESOME YOU WON'T BE DISSAPOINTED!! its a excellent case!!! my rig should be finished wiithin the week (hopefully)

TRIPLE WC LOOP V2000B PLUS watch out for it soon