Nvidia 8800GTS Vmods

[N1ck R1mer]

If you did the OVP mod too, perhaps up to 1.5v would be ok, as imo the PWM on the card would be reaching its limit between 1.5 & 1.7v. I'd recommend the HIPRO5 coil & cap mod if you want to go over ~1.6v

Is there a way to disable ovp on these cards?
SAD

Yeah, the OCP mod (from here) is NOT the OCP, it's OVP mod actually. It based on replacing (lower) the resistor, connected to Vmax pin of the PX-3540 (pin#41), but... The problem is, that with 8800GTS the OCP works earlier, than the OVP, so this mod can't help. But...
As we know, the 8800GTS has 3-phase power conversion, so there are 3 resistors, that used for OCP (1 resistor at each phase). If we remove them, the OCP will disabled permanently. It'a a pity, that there is no exact pinout for the PX-3540 chip till now, so we can only guess:



The red marked resistors shoud be in the OCP scheme, but i'm not 100% sure of it. Why Shamino keeps silence? I appreciate any help