Quote Originally Posted by S1mon- View Post
I tried up to 1,8V PLL and 1,55 vFSB with 1,55 vNB and nothing help... I can't get my board to run at 475 FSB

My board also has an astronomic vDroop... I select 1,4875V in BIOS and I'm down to 1,376V while running P95

That's a lot of PLL to pump through. PLL in relation to FSWBT will or should help, but use sparingly, as this put stress on the overall bus, and especiallly CPU bus.

At this point, it's not the mobo that needs so much volts. As I stated before, this mobo is good to 540FSB with the right CPU and 500FSB is a easy one with as lil as 1.504v on NB 1.10v on SB, and 1.58v on SB 1.5.

Post back the other "Extreme Tweaker" settings you are using and we'll take a look.

Good Luck!