9500 running in M2N-SLi deluxe

[tictac]

I can hit 2150 too, but i don't have a 14x multiplier, so that doesn't result in 3+ ghz, but only 2.64 Ghz

For Setting up NB Speed... it does not come easy... you need to get your hand dirty before it done.. LOL

Tools Needed:
WPCREDIT

NB Register = Bus#0 Device#24 Function#3 Offset D4h (32bit access mode) , Bit 0,1,2,3,4 (5bit)

NB clock = 200 x (NbFid + 4).
*NBFid = in decimal

Bit = Hex = Decimal = NB Speed calculation
00001b = 1h = 1 = NB clock 200x (1+4) = 1000MHz
00010b = 2h = 2 = NB clock 200x (2+4) = 1200MHz
00011b = 3h = 3 = NB clock 200x (3+4) = 1400MHz
00100b = 4h = 4 = NB clock 200x (4+4) = 1600MHz
00101b = 5h = 5 = NB clock 200x (5+4) = 1800MHz
00111b = 6h = 6 = NB clock 200x (6+4) = 2000MHz
....
11011 = 1Bh = 27 = NB clock 200x (27+4) = 6200MHz

after setting it up.. you need to restart to make the NB speed change