Ok back up with new RAM! Flashed to 0802 and everything is OK so far!

445*9
DDR2 1186 5-5-5-15 @ 2.32v
Static Read = On
Clock Twister = Strong
Trans Booster = Off
Relax = 1

I am getting the same clocks as before, but with lower volts on everything except the CPU. That remains the same. I tried the NB at 1.55 Real, but OCCT RAM caused my machine to reboot. Bumped the voltage up one notch and I had stability. I am REALLY liking OCCT for tuning this board. Using Orthos and OCCT set to CPU, I was able to confirm the CPU was good. Then I ran OCCT set to RAM and had the reboot. The ability to stress the NB <=> RAM link is fantastic.

Vcore = 1.54 (1.5625 set in BIOS)
DRAM = 2.32 (2.22 set in BIOS)
NB = 1.58 (1.55 set in BIOS)
SB = 1.12 (1.10 set in BIOS)
SB2 = 1.52 (1.5 set in BIOS)
FSBT = 1.58 (1.55 set in BIOS)
PLL = 1.71 (1.6 set in BIOS)

Temps Idle/Load:

NB = 32/35
SB = 33/37
MB = 28/32
CPU = 28/54 (35/65 according to CoreTemp 0.95.4)

Ambient = 24.5

EDIT: I need to update my sig!