my first ALU POT

[Misko]

aghh great caliber , I use also 7x mm ammo

[dinos22]

what are the dimensions like on the VGA pots particularly tube inner width
some shots of the inside??

[Monstru]

We've finaly managed to test the new pot form Duniek this week-end, and you can see here the whole story with lots of pics. The pot performed great in my opinion, on Dfi Infinity P35 Blood Iron we got -87 in Bios in idle (which is of course wrong) and -58 in idle on the temp probe (at ~1mm from the base of the pot).

[dinos22]

got mine after 3 months lol

basically very much like a kayl pot

kayl pot has a slightly nicer finish and i asked for really thick walls which was not really that necessary but it is what it is hehehe

my pot is supposed to have a 20mm base but i don't think it does....no big deal and probably better it's that way as it will be a dry ice pot most likely

this sort of bullet design is all very similar in performance i'm sure as the base is almost a kilo on its own (2lb ~0.9kg)

i really like how the white hold down bracket "hugs" the tube......there is absolutely no freeplay whatsoever and you have to put a bit of force and turn it a little to lower it down over the tube :thumb: i like that a lot as there would be no gaps.....this is also good because the material it's made out of it some kind of plastic so it probably won't sweat as much as a mounting plate

Kingpin makes much nicer pots than these and kayls but at the end of the day it is not about that but how well they perform >> and only time will tell

i'm happy

[youngpro]

my pot arrived aswell, damn thats one thick bit of copper, my preference to pots has changed slightly since i ordered this, i prefer a slightly shorter pot, ill see how it goes at current length, if i need to ill cut some off the top, and possible drill a series of fine holes in the bottom to increase surface area, but the sheer mass that i required is definatly there, and should do what i want (this is intended to be my 3d benching pot, where as my kayl pot will be more pi based)

[Pete]

I wandered why price of copper went up, you've got half of libias desiet there in copper

[MaSell]

Last photo is very nice!

[dinos22]

I wandered why price of copper went up, you've got half of libias desiet there in copper

it's TWICE as heavy as Kingpin F1 pot according to youngpro

[Duniek]

it's TWICE as heavy as Kingpin F1 pot according to youngpro

btw
another definition of cheap alu pot
78mm ALU caliber

[Duniek]

49pots sold already

50th pot will be make from unique design

[Duniek]

[Duniek]

couple of last pics of these pots


both pots have drilled 2mm hole for temp probe


and package

[Noob-ftw]

Well done Duniek! I would so buy a GPU pot from you, but I need more money.

[Pete]

Love the black back plates

[Duniek]

thanks Noob-ftw and Pete

new low price container for my friend

[Duniek]

FoX set





3870x2 ready

[Fujimitsu]

Nice mounting plate, and pots. You work fast man..

[Duniek]

set ready
for all new vga nv 7 8 9 series and radeon stared since x1800, maybe earlier gpus too but dunno about holes measures + 3870x2 too of course with special mounting
since now I drill little hole for temp probe with all pots

SET


and packaging

[I34z1k]

So when's mass production starting

[Harshal]

Nice work bro

[Felipe]

nice insulation and pot duni!!

[Duniek]

So when's mass production starting

never

I like make custom pots, for that what customer want
so possible to makes diffrents designs

[lolhalol]

dude saying u do customs jobs is an understatement.. u do miraculous jobs..lol... seems like u can do almost any design i can think off.lol

[Viss]

Duniek m8 thanks a lot for the fast shipping again Your doing a great job. The little solid is doin fine

[Duniek]

next customs