Official ASUS X38 Boards: P5E, P5E3 - Info/BIOS Thread

[Xelation]

Forgot my main bios settings:

Extreme Tweaker

Ai Overclock Tuner [Manual]
CPU Ratio Control [Manual]
- Ratio CMOS Setting [9]
FSB Frequency [333]
FSB Strap To North Bridge [Auto]
PCIE Frequency [100]

DRAM Frequency [DDR2-1111MHz]
DRAM Command Rate [2T]
DRAM Timing Control [Manual]
Primary Info: 5-5-5-15-3-42-6-3
CAS# Latency [5 DRAM Clocks]
RAS# To CAS# Delay [5 DRAM Clocks]
RAS# Precharge [5 DRAM Clocks]
RAS# Active Time [15 DRAM Clocks]
RAS# To RAS# Delay [3 DRAM Clocks]
ROW Refresh Cycle Time [42 DRAM Clocks]
Write Recovery Time [6 DRAM Clocks]
Read To Precharge Time [3 DRAM Clocks]
Secondary Info" 8-3-5-4-6-4-6
Read To Write Delay (S/D) [8 DRAM Clocks]
Write To Read Delay (S) [3 DRAM Clocks]
Write To Read Delay (D) [5 DRAM Clocks]
Read To Read Delay (S) [4 DRAM Clocks]
Read To Read Delay (D) [6 DRAM Clocks]
Write To Write Delay (S) [4 DRAM Clocks]
Write To Write Delay (D) [6 DRAM Clocks]

DRAM Static Read Control [Auto]
Ai Clock Twister [Auto]
Transaction Booster [Auto]
VCORE Voltage [1.3500]
CPU PLL Voltage [Auto]
FSB Termination Voltage [Auto]
DRAM Voltage [Auto]
North Bridge Voltage [Auto]
Sout Bridge Voltage [Auto]

Loadline (Calibration) [Auto]
CPU GTL Reference [Auto]
North Bridge GTL Reference [Auto]
SB 1.5v Voltage [Auto]

CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]

Advanced
CPU Configuration

CPU Configuration [Manual]
CPU Ratio Control [9]
Ratio CMOS Setting [Disabled]
C1E Support [Disabled]
CPU TM Function [Disabled]
Vanderppol Technology [Disabled]
Execute Disable Bit [Disabled]
Max CPUID Limit [Disabled]

fingers hurt from typing pff

PS 1.35v in Bios is 1.312 in CPUz (with little bit of fluctuating), is this correct or
does it need to be 1.35v in CPUz?