[18th Anniversary] Asus Black Pearl - P5k-Premium Testing Report

[sesdave]

Hi there, i used the settings you gave me with the tighter timings, running at 450x8 as well. looks good, but i pumped up the Vcore to 1.485 in bios and it shows 1.448 actual under load i believe. but its still not Prime large fft stable, it runs for about 5 minutes and then autoreboots. what could be the problem, any suggestions?

run looser timmings of 5,5,5,15 with auto subtimings until you can get prime stable.Whats your q6600 vid and batch - wouldnt have thought it would need any more than 1.45 in BIOS. What is your current setup - what cooling /psu ect. what temps are you getting on load? Have you enabled damper and disabled the speed throttling settings as per list. If still not stable try giving it CPU/NB ref volt of .61v to start then .63v and 67v if not stable.