*Official Retail G0 Q6600 Overclocking Thread*

[andressergio]

Hey Chuck !

I posted on Offical Q6600 thread...

Yes I tested a lot of (x7) i LOVE IT !! cause of the bandwidth it's on 1852 FSB !! I wish i can be stable at 500x7 but no go...

My Best config stable prime95 on (x7) vcore = 1,3250 is:

[IMG][/IMG]

http://www.subirimagenes.com/imagen-...3-1587780.html

I found a lot of interesings OC's, like 3,2Ghz ~ 1,2875, 3,4Hhz ~ 1,4, 3,5Ghz ~ 1,45

As i posted before, I wish i can do 3,6 with little vcore but's not prime95 stable...soon as the thermalright ultra arrives i will try, but i think that's the batch that needs like 1,525 to be prime95 stable at 3,6

I can boot an play games at 3,6 ~ 1,45 and 3,7 same vcore...it's all i need, no reboots, no memory errors

My best bench on air it's:

[IMG][/IMG]

http://www.subirimagenes.com/imagen-...3-1587837.html

Just stable por SPI and ~ 1,625vcore, at this vcore's I need a WC, Also i pumped till 4095 with setfsb and can do 1 SPI 1MB and blu screen

The Other voltajes i Used are:

PLL = 1,5
FSB = 1,4
NB = 1,4
South B = 1,25
Vdimm = 2,2 always stock, some say microns DIE if more than 2,2

Best regards
Sergio