hey jedda
what are the spec's on your rig??? vga ???
hey jedda
what are the spec's on your rig??? vga ???
Originally Posted by skinnee
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
8800GTX, 4x1GB OCZ 800RAM, Q6600 GO stepping heat machine. It'll probably get a second card shortly once finances recover. lol
I'm getting an update ready. Been awefull quiet here for a bit. I'm running M-cube spaghetti and two loops trying to keep it neat and it takes a while.
I found some sensors for water temp and am tempted to get water in and out on both rads. See what's really happening with those TC rads.
Didn't know D-tek made them but at 10kohm they're perfect for the sensor hub which has 6 extra slots to use.
Really like the chrome sleeved usb cable (lower left) but haven't black sleeved the others yet.
Still have to decide if the third loop goes in or not for a chipset mosfet loop. If so a third Fillport will go beside the others.
Last edited by Jedda; 10-18-2007 at 08:28 AM.
looks good mate
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Having camera hassles but here's one of both rads in place when I was measuring and cutting tube.
coming along nicely...any more pic's???
camera busted ?
cheers
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Busted, it's screwing the lighting. Looking at replacing it.
I want to screen off the drive tower, so am tinkering with mesh and black plexi to see if I can make a good looking screen that tones in with the rest.
Last edited by Jedda; 10-23-2007 at 07:32 AM.
i put mesh over my drive bays today looks good take a pic for ya 2morow...
Also i have to drill into my middle section....I'm going buy a drill this w/e what's that attachment on your drill in the above pic's
cheers mate
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
It's a right angle drive attachement from Brunnings. Gets in to the case where the other wont fit.
Hey, saw nice blue heatshrink in-Smiths today. All sizes quite cheap.
Last edited by Jedda; 10-23-2007 at 07:55 AM. Reason: Damn these bananas it's the man's name for god's sake. Richard!
Reason: Damn these bananas it's the man's name for god's sake. Richard!
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
wow Jedda this is looking a sweet rig
I sure do hope that those fans get some more elbow space. That plate just above them needs some modding, but you might already have thought of thatHaving camera hassles but here's one of both rads in place when I was measuring and cutting tube.
I'm looking forward to see more of your progress
More pics! ..and I love all that sleeving!
Ducati ... Hope you like doing some mechanics or a fat wallet ! I have 2 friends who had 999... Most time spend at the garage then on the tracks or road
But I have to admit, I love the sound of Ducati with those Rossi's pipe's ... But I prefer those pipes, like Rossi, on a Yam
Sabien
Thanks mate.
JVT
I may put some mesh in cut-outs above the lower rad but there's more space than it looks.
fallencow
Got some detail pics to add tonight.
Voltaire
Rossi, didn't he used to be world champion?
Used to ride a 900SS back in the day, but mine was silver not red like Stoner's.
Although, to give Rossi his due, he's a phenomena on any brand.
fallencow mentioned the sleeving so I thought I'd share some of the small details.
I wanted the build to be black and silver so coloured wiring had to be sleeved as many have done.
So it's out with anything that'll push in the pins on a 3-pin plug. I have this tool from a cheap sunbeam set.
On with a length of sleeve and two pieces of heat shrink.
Push the pins back into a nice black plug and it's done bar a little hot air on the heat shrink.
Don't really like the coloured wires showing on the fan frame its self and never have. Especially on three fan rads when they show through the grill.
Have an idea for that. Results in a later pic.
This fan has an extra fitting included for stepping the voltage down and I wanted to have them available.
So I got a hold of some plugs from ACRyan, black of course.
Pop 'em out with a usual molex pin tool and pop 'em back in.
Again with the sleeve and heat shrink.
A little soldering and we have the black at both ends. The peg holds back everything from the hot iron.
Couldn't put separation heat shrink on the two wires. So used liquid tape.
And then I thought
Didn't look too bad at all.
The liquid tape covers the wires with only one coat and looks great close up. When compared with the fan on the right I'm really happy with the outcome.
If I can learn a bit more how this new camera works, might even have focussed pics in future.
Last edited by Jedda; 11-01-2007 at 03:27 AM.
Such a bad pic of the ram fan with it's new black dress last post.
This one is slightly better.
Knocked up a 24-pin jumper plug for leak testing, while I was fiddling around.
Last edited by Jedda; 11-01-2007 at 03:21 AM.
i reckon it look s waaay better like that (painted) than corsair colours - it looks stealthySuch a bad pic of the ram fan with it's new black dress last post.
This one is slightly better.
NICE WORK mate...
I wish i wasn't capped atm takes forever to load pic'sdamn you telstra
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Poor disruptfam
Now I have an urge to do a similar mod with the TJ07's or the V2000's instead. Damn you!
Now that would be Xtreme!
Woh, disrupt', capped on the 2nd.
Does that mean capped 'till the end of the month?
Haven't ever been sure if it's better showing the pics this size (800x600) so they're really the thread and tell most of it by themselves or if I should thumbnail them.
Personally I hate linking to pics and tend to only view a few like that. Still it's better for the bandwidth-challenged.
Really like having a black plug on the Corsair ram cooler. Even thought of taking the mobo back out and switching in black fan headers on it, but that'd be crazy. Wouldn't it?
Suppose it would.
Might look good though?
Hmmm...
Well after seeing this build and the fact that I already have one, it's an idea that has really grown on me as of late.Now that would be Xtreme!
Would you still be able to rma a board that has been touched like so? Could always nicko them black? :PReally like having a black plug on the Corsair ram cooler. Even thought of taking the mobo back out and switching in black fan headers on it, but that'd be crazy. Wouldn't it?
Suppose it would.
Might look good though?
Hmmm...
Last edited by step; 11-01-2007 at 01:44 PM.
capped until the 6th not 2 bad....
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Posting Permissions
Reply With Quote
Bookmarks