**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[C-N]

Guys I just noticed something strange.... If you set 1.65/1.7v + on the NB the (Graphic interface transfer rate) drops down to 1x on the motherboard tab of CPU-Z.

Can you guys confirm this is the case with your rigs, I am using the 1005 BIOS BTW but confirmation with any BIOS would be nice.

CN

[g0dM@n]

Guys I just noticed something strange.... If you set 1.65/1.7v + on the NB the (Graphic interface transfer rate) drops down to 1x on the motherboard tab of CPU-Z.

Can you guys confirm this is the case with your rigs, I am using the 1005 BIOS BTW but confirmation with any BIOS would be nice.

CN

i'd love to help you, but even tho i JUST GOT MY RIG up with this board i won't be able to attend to it until probably sun night.

CN, AWESOME AVATAR!!!!!

[C-N]

i'd love to help you, but even tho i JUST GOT MY RIG up with this board i won't be able to attend to it until probably sun night.

CN, AWESOME AVATAR!!!!!

Thanks for the reply bud, its not really a major problem for me as 1.57-1.61v NB is all I need to do what I want anyway so don't rush your build on my behalf.

The problem is now I know its there it will bug me all weekend.

CN.

[Brother Esau]

Thanks for the reply bud, its not really a major problem for me as 1.57-1.61v NB is all I need to do what I want anyway so don't rush your build on my behalf.

The problem is now I know its there it will bug me all weekend.

CN.

I'll look into it next time I reboot Craig...OK...9/13/07 VTT 1.60v NBVTT 1.70v 116-116-118.........................

[C-N]

Guys I just noticed something strange.... If you set 1.65/1.7v + on the NB the (Graphic interface transfer rate) drops down to 1x on the motherboard tab of CPU-Z.

Can you guys confirm this is the case with your rigs, I am using the 1005 BIOS BTW but confirmation with any BIOS would be nice.

CN

For anyone that is interested I finally got to the bottom of my issue above.

It would be nice if anyone else could confirm or deny this issue so we all know whether its a non issue i.e my board or otherwise.

When you run the "PCIE Clock" over 110 & dial in 1.7v NB the board drops the "Graphic interface transfer rate" down to 1x. I have tested this with 913, 1005 & the1019 BIOS's.

I have been running the PCIE Clock at or over 110 since I have had this board & it continues to run 110mhz @ 3.8ghz DDR1190 with 1.61v NB however if you want to go faster say 3.9ghz ish you may need to add some extra NB voltage to keep it stable & to do so without the Graphic interface transfer rate dropping to 1x you have to drop the PCIE clock.

CN.

[jimmyz]

For anyone that is interested I finally got to the bottom of my issue above.

It would be nice if anyone else could confirm or deny this issue so we all know whether its a non issue i.e my board or otherwise.

When you run the "PCIE Clock" over 110 & dial in 1.7v NB the board drops the "Graphic interface transfer rate" down to 1x. I have tested this with 913, 1005 & the1019 BIOS's.

I have been running the PCIE Clock at or over 110 since I have had this board & it continues to run 110mhz @ 3.8ghz DDR1190 with 1.61v NB however if you want to go faster say 3.9ghz ish you may need to add some extra NB voltage to keep it stable & to do so without the Graphic interface transfer rate dropping to 1x you have to drop the PCIE clock.

CN.

Must be the reason I get no video and a funny beep at 26 post code when I try to o.c. the pci-e bus. I even bought an I.D.E. hdd because I thought that was holding me back. Thanks I just assumed it was since there was no way to lock the pci bus seperately from the pci-e bus. (heck that may be the reason!).