Sorry to hear about the issues. use a spoon to pry it off from the back. and if you can try to put something thin and firm like a credit card under the spoon to keep from damaging the board.
Sorry to hear about the issues. use a spoon to pry it off from the back. and if you can try to put something thin and firm like a credit card under the spoon to keep from damaging the board.
QX 9650 5ghz with 1.55v 4.8ghz with 1.5v 24/7 in a VAPOLI V-2000B+ Single stage phase cooling.
DFI LP LT X-38 T2R
2X HD4850's water cooled , volt modded
Thermaltake 1KW Psu
4x Seagate 250GB in RAID 0
8GB crucial ballistix ram
I manage to take it out but the part where us to stick to the motherboard got stuck to it... It's totally gone now... will that effect on the next install? Having that part missing?....
I seriously wouldn't worry about that Ultra power supply. The things I read over at DIY about the psu's that are not compatible with DFI boards listed the Ultra, but the Ultra was listed from a few years ago. The ones today, the X3 line in particular, is thought very highly of. Here is a review of the X3 1000watt unit:
http://www.jonnyguru.com/review_details.php?id=103
On the other part of your last post, is that Thermalright backplate stuck on that well that it won't come off??? I was going to install the new XWB-1 waterblock, but don't really feel like going through that hassle if something doesn't work out right.
Asus P6T6 Revolution/Core i7 965EE
Vista Ultimate 64bit
BFG GTX295
6x2gig OCZ Platinum DDR3-1600
Samsung SH-S223Q
2 640gig WD's in raid 0
Areca ARC-1210
Auzentech X-FI Forte/Z-5500's
Corsair 1000w psu
Originally Posted by n00bstorm
I manage to take it out but the part where us to stick to the motherboard got stuck to it... It's totally gone now... will that effect on the next install? Having that part missing?....
First off you should have never peeled off the peel and stick...I dunno why TT thinks someone wants that kind of hassle.
Secondly you simply need to use another piece of foam tape to insulate the bracket from the board. You can use double-sided foam tape and piece it together. But this time do not remove the protective film when applying to the mobo!
BTW you can use Electronic or electrical parts cleaner (spraycan) from the Auto parts to remove some adhesives...does not work on everything but does work on some foam tape.
20 Logs on the fire for WCG:i7 920@2.8
X3220@3.0
X3220@2.4
E8400@4.05
E6600@2.4
LOL.....Low and behold another VictimSo you are saying that the PSU i got its also bad for this motherboard?... I'm having the best time of my life right now... I spend extra $200 on memory just to *test* don't tell me I got to spend that much on another PSU unit just to *test*... and I need to return the MB but how the hell do you take this out?
Don't feel like braking the board in half just to get that stupid Thermalright bracelet in the back... ahh the joy of life... I feel like ending my life right about now...Don't ever remove that film on the Sponge adhesive buffer!
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Ahh this has been nothing more then joy... well lesson learned the hard way... anyways thanks for the heads up CyberDruid ill get a double faced tape and try to make the same kind that once was... ahh this sucks... I just hope I get a good MB next time because this is no fun...
So you are saying that the PSU i got its also bad for this motherboard?... I'm having the best time of my life right now... I spend extra $200 on memory just to *test* don't tell me I got to spend that much on another PSU unit just to *test*... and I need to return the MB but how the hell do you take this out?
Don't feel like braking the board in half just to get that stupid Thermalright bracelet in the back... ahh the joy of life... I feel like ending my life right about now...
Looks kinda Sexy like that
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Looks kinda Sexy like that
Has anyone got this version of the board? If so what sort of results have you been getting, it looks excellent for watercooling.
i5 2500K @ 4.9GHz MSI Z77 MPower G.Skill Trident 8GB 2400C10
EVGA GTX 1070 SC 8GB @ 1784/4004MHz Corsair HX 750 PSU
Samsung 830 256GB Creative ZxR Thermalright Silver Arrow
NEC 24WMGX3 24" TFT Fractal Design Define S Win 7/10 64bit
Gotta tell ya guys I added a 60mm x 25mm 19.7 cfm fan right over the PWM area and my temps under load in prime have dropped 10c on PWM and 8c on NBFor 3-$4.00 for a fan (Panaflow) 19.7 cfm from New Egg you can certainly expect some massive temp drops!
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Hey, Nelly how are you doing? There is a thread exclusively just for the non transpiper version of the board started by Andre YangHas anyone got this version of the board? If so what sort of results have you been getting, it looks excellent for watercooling.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Hey there, not so bad tempted to go for something very watercooling friendly hence the above. Just found the thread you mentioned:- http://www.xtremesystems.org/forums/...&highlight=DFIHey, Nelly how are you doing? There is a thread exclusively just for the non transpiper version of the board started by Andre Yang
Cheers
i5 2500K @ 4.9GHz MSI Z77 MPower G.Skill Trident 8GB 2400C10
EVGA GTX 1070 SC 8GB @ 1784/4004MHz Corsair HX 750 PSU
Samsung 830 256GB Creative ZxR Thermalright Silver Arrow
NEC 24WMGX3 24" TFT Fractal Design Define S Win 7/10 64bit
Yup... and it runs 4GHz 24/7 with my e6850. I have had it up to 4.2GHz prime stable, but throttle it back to 4.0GHz for everyday use.Has anyone got this version of the board? If so what sort of results have you been getting, it looks excellent for watercooling.
Cheers!
DFI LT P35-T2R Motherboard / E6850 CPU @ 4GHz Prime95=47*C
OCZ FLEX XLC HPC Edition 2GB PC9200 Ram @ 1,200MHz
BFG 8800GTS @ 750MHz
4 - WD 150G Raptors (2 - RAID0 Arrays)
2 - WD 500G Backup Drives
Loop1: Res->MCR320->DDC3.2/Petra's Top->CPU D-Tek Fuzion->Res
Loop2: Res->MCR220->DDC3.2/Petra's Top->NB/SB/Ram-> Res
Loop3: Res->MCR220->DDC3.2/Petra's Top->GPU MCW60->Res
My Lian-Li 343B 3-Loop Case Project
what are your temps & voltages on that?
The CPU is set at 1.53v and under Prime95, it got up to 40*C reported by Smart Guardian. I understand that you add 15 degrees to that, so, the CPU went up to around 55*C.
Cheers!
DFI LT P35-T2R Motherboard / E6850 CPU @ 4GHz Prime95=47*C
OCZ FLEX XLC HPC Edition 2GB PC9200 Ram @ 1,200MHz
BFG 8800GTS @ 750MHz
4 - WD 150G Raptors (2 - RAID0 Arrays)
2 - WD 500G Backup Drives
Loop1: Res->MCR320->DDC3.2/Petra's Top->CPU D-Tek Fuzion->Res
Loop2: Res->MCR220->DDC3.2/Petra's Top->NB/SB/Ram-> Res
Loop3: Res->MCR220->DDC3.2/Petra's Top->GPU MCW60->Res
My Lian-Li 343B 3-Loop Case Project
I already has so much on my mind and that happen to me and had to deal with that... it was not pleasant at all... I was about to brake the damn board in the end... I just hope I don't have to deal with this again and I get a good board once for all... because the next one its going to get it...Haha, that's awesome. We've all been there. Here's my best "Oh damn!" moment...
Trust in the Force Young Wood Pecker.
...Tell him what he's won Jim
Last edited by Brother Esau; 10-24-2007 at 08:21 PM.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Guys please help me get prepared for this next one... when I get the new board... what should I do first? I already have the PSU inside... all the standoffs are in the case... ( by the way how do you place a bolt in one of them? its behind this tube... can't figure it out... don't feel like taking parts off from the MB to get that bolt in there ) . So take out the MB when it comes... place the CPU in there ( Q6600 ) ... place the MB in the case... place some thermal paste... install the Thermalright 120 Xtreme... install one stick of ram... ( Which one? (1) 512MB Kingston 667 (2) 1GB Crucial 800 (3) 1GB Corsair 1066? ) in the closest to the CPU slot the first one? Connect the 24 pin and 8 pin from PSU to MB.. then install the videocard and connect that too... and turn it on?...
Last edited by n00bstorm; 10-24-2007 at 11:53 PM.
Guys please help me get prepared for this next one... when I get the new board... what should I do first? I already have the PSU inside... all the standoffs are in the case... ( by the way how do you place a bolt in one of them? its behind this tube... can't figure it out... don't feel like taking parts off from the MB to get that bolt in there ) . So take out the MB when it comes... place the CPU in there ( Q6600 ) ... place the MB in the case... place some thermal paste... install the Thermalright 120 Xtreme... install one stick of ram... ( Which one? (1) 512MB Kingston 667 (2) 1GB Crucial 800 (3) 1GB Corsair 1066? ) in the closest to the CPU slot the first one? Connect the 24 pin and 8 pin from PSU to MB.. then install the videocard and connect that too... and turn it on?...
First thing you do is get some replacement adhesive tape from TT and peel the sticker off and re apply
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Ran Prime last night while doing some GTL testing and forgot to shut it down. This morning it was still going. The board's stable at 3800 without even trying.
Yup its a great board that just keeps getting better.
On the 1005 BETA BIOS, the memory has been tweaked & now my OCZ's will run with all the "Read delay phase adjust" set to enable or switch them all back to auto & it will run read delay 6 on the 266/667 good & stable all the way up to DDR 1300.
With read delay 6 @ 3.8 DDR 1190 Everest is making 10650mb/s read with 46.5ns latency which is 300mb/s better than the 913 BIOS
CN.
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
Ran Prime last night while doing some GTL testing and forgot to shut it down. This morning it was still going. The board's stable at 3800 without even trying.
Nice OC.
Can you share your settings for this clock Praz?
I have just start to play with this board!
Thx..
i7 2600k @ 4.5GHz, 1.29V
Asus Maximus IV Extreme-Z (bios 0706)
8GB Ceil Corsa 2133MHz cl9
Asus GTX580
2x OCZ ve3 120Gb Max Iops (Raid0)
1x WD Black 1Tb
Asus Xonar Essence STX
NEC 24WMGX3
Corsair AX1200W
Lian-Li P80 A.S
@Praz
Regarding your settings. Care to post up the critical voltages? I have been able to idle at 4.1 for half a day and run benches at 4050 and now I want to get minimum voltages set for long term Folding at 3800.
I've been running StressCPU2_32 for several hours and I think I could drop down a tad on all the voltages so any reference points would be a great help.
Thanks.
20 Logs on the fire for WCG:
Posting Permissions
Reply With Quote
Bookmarks