Guys this is my current 24/7 setup...stable for more than 8-hours over Prime95, Orthos & OCCT:
http://valid.x86-secret.com/show_oc.php?id=257188
I was hoping for some suggestions/comments/opinions if I could squeeze more with lower voltages good for 24/7 run.
DFI™ LanParty UT P35-T2R (0913 Bios)
Intel™ Core2Duo E6850 with Thermalright™ HR-01 Plus @3602.09Mhz (450.26x8)
Team Xtreem™ DDR2-9600 2x1GB with Thermalright™ HR-07 @562.8Mhz
XFX™ NVidia™ 8800GTX with Thermalright™ HR-03 Plus (Core 650Mhz/Shader 1660Mhz/Memory 1030Mhz)
Creative™ Sound Blaster X-Fi™ XtremeGamer Fatal1ty Pro
Western Digital™ Raptor 74GB & Seagate™ Barracuda 500GB+320GB SATA
Silverstone™ DA750
Thanks!Code:>CPU Feature: Thermal Management Control.......... - Disabled PPM(EIST) Mode...................... - Disabled Limit CPUID MaxVal.................. - Disabled CIE Function........................ - Disabled Execute Disable Bit................. - Enabled Virtualization Technology........... - Enabled Core Multi-Processing............... - Enabled >DRAM Timing: Enhance Data transmitting........... - Fast Enhance Addressing.................. - Fast T2 Dispatch......................... - Enabled >Clock Setting Fine Delay Press Enter: [COLOR=blue]Ch1 Clock Crossing Setting......... - More Aggressive [COLOR=blue]DIMM1 Clock Fine Delay............. - Current[1] [COLOR=blue]DIMM2 Clock Fine Delay............. - Current[6] [COLOR=blue]Ch1 ControlFine Delay.............. - Current[9] [COLOR=blue]Ch1 ControlFine Delay.............. - Current[6] [COLOR=blue]Ch2 Clock Crossing Setting......... - More Aggressive [COLOR=blue]DIMM3 Clock Fine Delay............. - Current[1] [COLOR=blue]DIMM4 Clock Fine Delay............. - Current[6] [COLOR=blue]Ch2 ControlFine Delay.............. - Current[9] [COLOR=blue]Ch2 ControlFine Delay.............. - Current[6] [COLOR=blue]Ch1 Ch2 Common Clock Setting....... - More Aggressive [COLOR=blue]Ch1 RDCAS GNT-Chip Delay........... - Auto [COLOR=blue]Ch1 WRCAS GNT-Chip Delay........... - Auto [COLOR=blue]Ch1 Command To CS Delay............ - Auto [COLOR=blue]Ch2 RDCAS GNT-Chip Delay........... - Auto [COLOR=blue]Ch2 WRCAS GNT-Chip Delay........... - Auto [COLOR=blue]Ch2 Command To CS Delay............ - Auto CAS Latency Time (tCL).............. - 5 RAS# to CAS# Delay (tRCD)........... - 5 RAS# Precharge (tRP)................ - 4 Precharge Delay (tRAS).............. - 12 All Precharge to Act................ - Auto REF to ACT Delay (tRFC)............. - 42 Performance Level................... - 6 >Read delay phase adjust Press Enter: [COLOR=blue]Channel 1 Phase 0 Pull-In.......... - Auto [COLOR=blue]Channel 1 Phase 1 Pull-In.......... - Auto [COLOR=blue]Channel 1 Phase 2 Pull-In.......... - Auto [COLOR=blue]Channel 1 Phase 3 Pull-In.......... - Auto [COLOR=blue]Channel 1 Phase 4 Pull-In.......... - Auto [COLOR=blue]Channel 2 Phase 0 Pull-In.......... - Auto [COLOR=blue]Channel 2 Phase 1 Pull-In.......... - Auto [COLOR=blue]Channel 2 Phase 2 Pull-In.......... - Auto [COLOR=blue]Channel 2 Phase 3 Pull-In.......... - Auto [COLOR=blue]Channel 2 Phase 4 Pull-In.......... - Auto MCH ODT Latency..................... - Auto Write to PRE Delay (tWR)............ - 13 Rank Write to Read (tWTR)........... - 11 ACT to ACT Delay (tRRD)............. - 3 Read to Write Delay (tRDWR)......... - 8 Ranks Write to Write (tWRWR)........ - Auto Ranks Read to Read (tRDRD).......... - Auto Ranks Write to Read (tWRRD)......... - Auto Read CAS# Precharge (tRTP).......... - Auto ALL PRE to Refresh.................. - Auto >Voltage Settings: CPU VID Control..................... - 1.32v CPU VID Special Add................. - Auto DRAM Voltage Control................ - 2.11v SB 1.05V Voltage.................... - 1.070v SB Core/CPU PLL Voltage............. - 1.55v NB Core Voltage..................... - 1.42v CPU VTT Voltage..................... - 1.34v Vcore Droop Control................. - Disabled Clockgen Voltage Control............ - 3.45v GTL+ Buffers Strength............... - Strong Host Slew Rate...................... - Weak GTL REF Voltage Control............. - Disabled CPU GTL1/3 REF Volt................. - 110 CPU GTL 0/2 REF Volt................ - 110 North Bridge GTL REF Volt........... - 110 Genie BIOS Settings: Exist Setup Shutdown................ - Mode 2 CLOCK VC0 divider................... - Auto CPU Clock Ratio Unlock.............. - Enabled CPU Clock Ratio..................... - 8 Target CPU Clock.................... - 3550MHz CPU Clock........................... - 450 Boot Up Clock....................... - Auto DRAM Speed.......................... - 266/667 Target DRAM Speed................... - 1124MHz PCIE Clock.......................... - 110mhz PCIE Slot Config.................... - 1x 1x CPU Spread Spectrum................. - Disabled PCIE Spread Spectrum................ - Disabled SATA Spread Spectrum................ - Disabled
Reply With Quote
Bookmarks