**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Praz]

Yea but what Vdimm are you throwing at them please?

Good question. Running 1200MHz is a non-issue. Doing it with acceptable voltages is the problem.

[Brother Esau]

Good question. Running 1200MHz is a non-issue. Doing it with acceptable voltages is the problem.

Yea, that

[emoners]

Good question. Running 1200MHz is a non-issue. Doing it with acceptable voltages is the problem.

Same here...trying to get the highest core/mem speed at the lowest possible voltages

[Solarfall]

Yea but what Vdimm are you throwing at them please?

oh yeah sorry the smartguardian reading is quite unreadable isn't it lol.. the ram voltage was 2.4v
anyways i'll probably do more ram clocking today /update the bios.. now off to work

[Brother Esau]

oh yeah sorry the smartguardian reading is quite unreadable isn't it lol.. the ram voltage was 2.4v
anyways i'll probably do more ram clocking today /update the bios.. now off to work

Well thats the problem with this ram on the P35 is that you need way too much voltage for 1100mhz you should and so shold I be able to do that on 2.250vdimm

[eva2000]

Well thats the problem with this ram on the P35 is that you need way too much voltage for 1100mhz you should and so shold I be able to do that on 2.250vdimm

nah not all micron d9 are same.. some need more voltage than overs so your mileage will vary

[Brother Esau]

nah not all micron d9 are same.. some need more voltage than overs so your mileage will vary

Hey, George
Different chipset I know but.....I get 1165mhz 2.3vdimm on 680i

[eva2000]

Hey, George
Different chipset I know but.....I get 1165mhz 2.3vdimm on 680i

different chipset indeed.. my 2x1GB OCZ PC2-8000 Titanium Alpha on 965P/975X/P35 do only 565mhz 4-4-4-5 at 2.45-2.50v and 585mhz 4-4-4-5 at 2.55-2.6v and cas5 doesn't help

on Asus 680i striker does 630mhz 5-3-3-x at 2.60v so yes mileage still varies

now my 2x1GB team 6400c3 on 965P/975X/P35 do 570-580mhz 4-4-4-5 at 2.35-2.45v but only 612mhz 5-3-3-x on 680i heh

[pumbertot]

does clockgen work on this board and if so which PLL?

[eva2000]

same clockgen as asus commando > http://i4memory.com/reviewimages/mot...35_T2R_27.html

[pumbertot]

same clockgen as asus commando > http://i4memory.com/reviewimages/mot...35_T2R_27.html

thanks mate but just tried CY28551 and its not reading correct cpu speed or FSB.

[eva2000]

use setFSB not clockgen

[pumbertot]

use setFSB not clockgen

ah i see. ok getting now. thanks again George.

edit: how do you run it? when i try to run setfsb.exe I get "sysinfor(x64).sys Error" lol what a n00b.

[ic3m4n2005]

Hi guys,

i finally received my Q6600 which should be able to do about 3,8 Ghz.
Any hints on how to start in Bios and work my way through ?
I know each cpu is different but a few hints would be awesome, since this GTL thing is new to (it's my first quad )

thx in advance

[eva2000]

ah i see. ok getting now. thanks again George.

edit: how do you run it? when i try to run setfsb.exe I get "sysinfor(x64).sys Error" lol what a n00b.

using latest setfsb ? maybe vista 64bit issue ??

[Solarfall]

hey guys what bios version are you using .. is the newest version any good ???

[Praz]

09/13 seems to be the best overall for me.

[Brother Esau]

Same here 09/13

[Solarfall]

09/13 seems to be the best overall for me.

Same here 09/13

alrighty then.. I'll give it a go

[emoners]

sorry if this question has been asked...but in the BIOS settings > DRAM Timing > Enhance Data transmitting... what does Turbo do?

[Brother Esau]

Look at the dfi 09/13/07 Bios template and it will tell you. You need really high NBV to run @ Turbo

[emoners]

Look at the dfi 09/13/07 Bios template and it will tell you. You need really high NBV to run @ Turbo

Thanks!

[ic3m4n2005]

I read a few pages of the beginning of this thread and it seems there is a problem with a sqealing or whizzling noise if cpu is loaded, is there any possibility to solve this ? It`s really annoying since i leace my sidepanel open
Other question, can you flash the Bios to the new one without problems or did someone got a dead mobo with post code 88 like on the nf 680i board ??

[Seanie's Show]

I read a few pages of the beginning of this thread and it seems there is a problem with a sqealing or whizzling noise if cpu is loaded, is there any possibility to solve this ? It`s really annoying since i leace my sidepanel open
Other question, can you flash the Bios to the new one without problems or did someone got a dead mobo with post code 88 like on the nf 680i board ??

No squeeling or whining going on here, I did at first till I changed the PSU, but now its all silent.

p.s. I have had post code 88 a couple of times when ive set bad bios settings ie: RAM speed, timmings, voltages etc, but a quick clear CMOS and pulling all my sticks of RAM but 1 while I rectify the problem has always cured that.

[Cascades]

No squeeling here either.... nice and quiet at 4GHz