D-tek nozzles

**Mmmm~** · 10-15-2007, 04:32 PM

Originally Posted by Linus@ncix

We've only got 5 left. Amazed at how fast these went. Some people are even ordering them from the states for $25 including shipping...

prolly cause its a cheaper way to get a few degrees C off compared to upgrading/adding radiators. $25 < $40-$130

**~~Baleful~~** · 10-15-2007, 05:09 PM

I've got mine in now, as soon as the bleeding is done i'll post some temps. However I won't be able to do a full before/after scenario. Before, I had one loop consisting of: PA120.3, DDC2 w/ Petras top, Fuzion, MCW60. I've now moved my CPU to a MCR220 w/ Panaflo FBA12G12M-1J fans. I can tell you that before, my temps loaded were 37 core1, 39~40 core2. The TC now has the 8800 GTX and the 680i NB on it so we'll see how the temps pan out.

**Talonman** · 10-15-2007, 05:18 PM

Originally Posted by SparkyJJO

Petrastechshop.com

Thanks for the post...

**Sparky** · 10-15-2007, 05:28 PM

Originally Posted by Jedda

Out of stock atm.

So I see... Hmm Sidewinder carries them as well but they are also OOS.

I guess watch those two places and jump when one of them has it back in stock.

**pak** · 10-15-2007, 06:41 PM

With all these people waiting for results one what nozzle to use and no one installing them, no one will ever get them in. But I can't complain because I am waiting too. :-)

--pak

**~~Baleful~~** · 10-15-2007, 07:12 PM

Alright i've got mine in and running. I'm using the 3.5mm nozzle and like I said above, I can't give you a before/after picture. But right now idle temps are 24/28, load 37/40. That's with a little air in the system, and the MX-1 hasn't cured. Ambient 78F, and 1.328V @ 2.66 Ghz w/ a E6420. This is a very quick and dirty startup, i was just anxious to see how my new setup ran =D. More accurate temps and stuff in a few days.

**Jedda** · 10-15-2007, 07:23 PM

Waiting for the other guy to do the testing is a bit slack.

**~~Omastar~~** · 10-15-2007, 07:27 PM

Damnit, I should've just ordered these when I saw them in stock at Petra's a a couple days or so ago. I had no idea they'd be such a big hit.

**~~Baleful~~** · 10-15-2007, 07:35 PM

Yeah I went ahead and took the plunge, $5 product, $12 shipping =/. Anyways, i think it was worth it, temps seem to be doing good. Offtopic, what else is out there to monitor VGA temps, BESIDES ATItool, Rivatune, and Ntune. ATItool and Rivatuner don't like my 680i for some reason, and Ntune is a POS. Anything else out there that's halfway reliable?

**pak** · 10-15-2007, 07:35 PM

Originally Posted by Omastar

Damnit, I should've just ordered these when I saw them in stock at Petra's a a couple days or so ago. I had no idea they'd be such a big hit.

Where have you been?

--pak

**~~Omastar~~** · 10-15-2007, 07:45 PM

Originally Posted by pak

Where have you been?

--pak

Well, I got a new job that's kept me fairly busy while not in school...

**Sparky** · 10-15-2007, 07:49 PM

Originally Posted by [cTxP]Baleful

Yeah I went ahead and took the plunge, $5 product, $12 shipping =/. Anyways, i think it was worth it, temps seem to be doing good. Offtopic, what else is out there to monitor VGA temps, BESIDES ATItool, Rivatune, and Ntune. ATItool and Rivatuner don't like my 680i for some reason, and Ntune is a POS. Anything else out there that's halfway reliable?

$12 shipping? What did you do, choose overnight or something?

**disruptfam** · 10-15-2007, 07:49 PM

any word when the new shipment is coming in petra?

**AAjax** · 10-15-2007, 07:55 PM

Originally Posted by Jedda

Waiting for the other guy to do the testing is a bit slack.

Well it will be a week before I have all my parts together for my build, and was just hoping for some juicy reading

**Jedda** · 10-15-2007, 08:23 PM

Originally Posted by AAjax

Well it will be a week before I have all my parts together for my build, and was just hoping for some juicy reading

OK, you're forgiven, 'cause you have a good excuse.

Wasn't your post that irritated me.

iadstudio · 10-15-2007, 08:54 PM

Originally Posted by [cTxP]Baleful

Yeah I went ahead and took the plunge, $5 product, $12 shipping =/. Anyways, i think it was worth it, temps seem to be doing good. Offtopic, what else is out there to monitor VGA temps, BESIDES ATItool, Rivatune, and Ntune. ATItool and Rivatuner don't like my 680i for some reason, and Ntune is a POS. Anything else out there that's halfway reliable?

I am having no luck OCing my VGA on this board. Ntune and Rivatuner worked for a minute but now not only will neither one of those OC the VGA, but Everest no longer displays VGA temps. I think it's a registry thing, but I dunno. No matter, I'll be just fine OC ing my CPU when I can Finally get my hands on a set of nozzels. I love Petra's, but if Sidewinder sends me that email notification and PEtra's is still out of stock, I'll have to go for it.

**[XC] DragonOrta** · 10-15-2007, 10:54 PM

Whenever PTS gets them in again, they'll be getting an order for another set of the nozzles and another Fuzion.

**welshtom** · 10-15-2007, 11:00 PM

http://www.chilledpc.co.uk/

prob about $8 shipping to US

**axemanrio** · 10-16-2007, 01:41 AM

Sidewinder got some nozzle kits in stock yesterday, you guys might want to look there.

**Talonman** · 10-16-2007, 06:03 AM

If they did, they are keeping it a secret:
http://www.sidewindercomputers.com/dtfunoackit.html

**axemanrio** · 10-16-2007, 06:10 AM

Maybe Gary hasn't had a chance to update his stock yet, but he did reply to my email indicating he's got around 10 kits. You might want to drop an email too.

**Talonman** · 10-16-2007, 06:12 AM

It has out of stock, but if you click the 'Order Now' button, it has in stock 'YES'!!

I just ordered a set...

I got mine!! Woo Hoo..

**Aldy402** · 10-16-2007, 06:27 AM

sidewinder is $6.99 compared to petra's $4.99. I think i'll wait for petras just to spite the 2 dollar price gouge..

**Talonman** · 10-16-2007, 06:50 AM

Well if he only has 10 or so kits in, I don't mind the 2 bucks.

I just want to get a set headding for the house.

**disruptfam** · 10-16-2007, 06:56 AM

petra has them in stock???

I Have mine pre-ordered.... hopefully they saved 1 for me.....

Thread: D-tek nozzles

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions