Quote Originally Posted by Tony View Post
Things I have found running some quals on this board.

bios 16:

TRAS needs to be higher than you usually run it. DFI LP P35 likes 14 this board likes 17. So 1150 flex 5-5-5-15 try 5-5-5-17

TRFC 42 is the key, if the SPD is tighter manually set to 42 and test again.

NB voltage needs to be 1.36 for 4GB at 1100, HEAT is a huge issue as you know.

Not got to tweaking for max speed yet this was just JSP tests but the TRAS and TREF settings were most important

T
Tony, what kind of issues do tighter settings on these cause? I have had a lot of shutdown issues trying to run above 3.4 and raising the voltages seem to make it worse. I changed psu's and have just gotten a different mb back from rma. Not tested much except that I still have the shutdown issues above 3.4 when trying to run Prime. Memory is in my sig and timings have been set to 5.5.5.15 with the rest on auto.