-
P5WDH; Rev 1.02g; 66M0AG; (July 2006); Q6700 G0 @ 3.0G; BIOS: 2302
- switched from QX6700 B3 to Q6700 G0, Aug 23, 2007
- stable @ 300FSB with either QX6700 B3 or Q6700 G0
- never a problem with memory @ 1000, 3:5, 5,5,5,15
- EZFlash USB flashdrive method
- use Speedstep, Vcore settings not tested
- FSB, MCH, ICH volts set manually to lowest values
- no problems with "onboard audio" staying disabled (X-FI F1 installed)
- or any other BIOS settings
- all QFan PWM settings disabled
- no radical performance change
- temps all nominal (Q6700 G0)
- AMB: 71f/21.6c; case closed
- approx 35watt less AC power, same machine clock/specs/parts, than QX6700 B3 (measured with WattsUpPro)
- specs/details in sig below
OCCT TEST @ 24min with CPUZ, Coretemp, MB Monitor:
http://www.esnips.com/doc/6474e6d5-b...2-OCCT-1-24min
OCCT TEST 1sec before end (shows idle temps/SpeedStep Vcore):
http://www.esnips.com/doc/565d658f-a...CT-2-00min-end
Last edited by bichi; 09-29-2007 at 04:26 PM.
CURRENT: (mild OC)
P5W DH Deluxe Rev 1.02G/66MOAG (BIOS: 2602); CPU: Q6700 (G0, wk 23) @ 3.0G; FSB: 300
MEMORY: OCZ OCZ2G11002GK 2x1gB or 4x1gB PC2-8800; vDIMM = 2.15vdc; 500mhz; 3:5; 5-5-5-15/18; 6113/6093
HSF: Thermalright SI-128 w/120mm; LOADED TEMPS: CPU: 121f/49c; Cores(avg): 143f/62c; MEM: 102f/39c; AMB: 72f/22c
GFX: AIW 2006 Edition PCIE; PSU: Seasonic S-12+ 550W; FANS: 4 x 120mm; 2 x 80mm (all low RPM, low noise)
DRIVES: 7200.10 250G (x2); 7K500 500G (x1); 7200.10 400G (x2); 7200.10 250G (x1); ADDED Controller: Adaptec 1430SA PCIE
AUDIO: X-FI Elite MOD: http://www.esnips.com/web/X-FIOpAmpandCapModification OPTICAL: LiteOn: DH-20A4P, LH-20A1H; BUILD LINK: http://www.esnips.com/web/ConroeReady
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks