Page 247 of 340 FirstFirst ... 147197237244245246247248249250257297 ... LastLast
Results 6,151 to 6,175 of 8487

Thread: ASUS P5W DH - Problems + Fixes Thread

  1. #6151
    Xtreme Member
    Join Date
    Dec 2004
    Posts
    453

    New CPU

    I Got my new Q6600 today and popped it in. It runs pretty well. I have not had time to really play with it yet.

    As you can see with my liquid cooling heat won't be an issue

    Than I ran 4 x pi just to see

    It went pretty well.

    Then a shot at 3D06. I was very happy with the CPU Score!!

    My 4 sticks of memory liked the lower fsb. The timings are nice and tight!!
    I will tweek on this machine over the next few days and weeks and just see what it can get out of this chip. Right now it is off to a good start.
    Oh and here are the links
    3D06 http://service.futuremark.com/compare?3dm06=3193893

    PC Mark05 http://service.futuremark.com/compare?pcm05=1114127

    WZ

  2. #6152
    Xtreme Member
    Join Date
    Jan 2006
    Location
    Alta Loma Ca.
    Posts
    308
    congrads wz off to a good start there looks good what rev is your board
    Rich
    rampage 2 extreme cpu 17920 Do memory kingston 1600 1x3 video ati 4890 1gig psu corsair 750 Tx cooled by ultra120extreme 120 fan @2000 rpm 2xraptors in raido
    case CM storm sniper

    My Heatware

  3. #6153
    Xtreme Member
    Join Date
    Dec 2004
    Posts
    453
    Thanks w2richwood, the board is the 1.04G bought just this last june.

    WZ

  4. #6154
    Xtreme Member
    Join Date
    Jan 2006
    Location
    Alta Loma Ca.
    Posts
    308
    mines a 103g thanking of getting a quad maybe later myself. but for now im looking to buy a e6600 tell they drop in price.hope mine will clock as good as yours
    Rich
    rampage 2 extreme cpu 17920 Do memory kingston 1600 1x3 video ati 4890 1gig psu corsair 750 Tx cooled by ultra120extreme 120 fan @2000 rpm 2xraptors in raido
    case CM storm sniper

    My Heatware

  5. #6155
    Registered User
    Join Date
    Sep 2007
    Posts
    50
    Hey Lawrywild

    I use your bios:
    P5W-DH-ASUS-Deluxe-2004-G0-45nm-Edition (Modified by lawrywild)
    Does it support with a Q9450 if i buy that processor ?

    I wanna buy that proc but i dont know if the bios you made can support the Q9450.

    But if i flash the bios to 2302 i think EIST and other problems with Vcore and Audio enables after boot are back if i flash it to 2302.

    If it not support the Q9450, do you make a new bios that support the Q9450 and that have no problem with EIST and Multiplier and the Onboard Audio and the Vcore ?..

  6. #6156
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,421
    Forgive my ignorance but is there already a bios out that allows tRFC and tRD changes?
    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

  7. #6157
    Xtreme Cruncher
    Join Date
    Jul 2005
    Location
    London - UK
    Posts
    3,349
    Quote Originally Posted by Zeus View Post
    Forgive my ignorance but is there already a bios out that allows tRFC and tRD changes?
    Nope, pretty sure there never will be..
    Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
    Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .

  8. #6158
    Xtreme Cruncher
    Join Date
    Jul 2005
    Location
    London - UK
    Posts
    3,349
    Quote Originally Posted by Snake_Eyes View Post
    Hey Lawrywild

    I use your bios:
    P5W-DH-ASUS-Deluxe-2004-G0-45nm-Edition (Modified by lawrywild)
    Does it support with a Q9450 if i buy that processor ?

    I wanna buy that proc but i dont know if the bios you made can support the Q9450.

    But if i flash the bios to 2302 i think EIST and other problems with Vcore and Audio enables after boot are back if i flash it to 2302.

    If it not support the Q9450, do you make a new bios that support the Q9450 and that have no problem with EIST and Multiplier and the Onboard Audio and the Vcore ?..
    Should do, but can never be 100% positive until it has been tested and confirmed. Basically, my bios has all the cpu uCodes from the "45nm compatible" bioses for other 975x boards and 2206. Unless ASUS actually made major changes to the bios to support 45nm, which I highly doubt, it will work fine.
    Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
    Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .

  9. #6159
    Xtreme Member
    Join Date
    Sep 2006
    Location
    Silicon Valley, CALIF
    Posts
    120
    P5WDH; Rev 1.02g; 66M0AG; (July 2006); Q6700 G0 @ 3.0G; BIOS: 2302
    - switched from QX6700 B3 to Q6700 G0, Aug 23, 2007
    - stable @ 300FSB with either QX6700 B3 or Q6700 G0
    - never a problem with memory @ 1000, 3:5, 5,5,5,15
    - EZFlash USB flashdrive method
    - use Speedstep, Vcore settings not tested
    - FSB, MCH, ICH volts set manually to lowest values
    - no problems with "onboard audio" staying disabled (X-FI F1 installed)
    - or any other BIOS settings
    - all QFan PWM settings disabled
    - no radical performance change
    - temps all nominal (Q6700 G0)
    - AMB: 71f/21.6c; case closed
    - approx 35watt less AC power, same machine clock/specs/parts, than QX6700 B3 (measured with WattsUpPro)
    - specs/details in sig below

    OCCT TEST @ 24min with CPUZ, Coretemp, MB Monitor:
    http://www.esnips.com/doc/6474e6d5-b...2-OCCT-1-24min

    OCCT TEST 1sec before end (shows idle temps/SpeedStep Vcore):
    http://www.esnips.com/doc/565d658f-a...CT-2-00min-end
    Last edited by bichi; 09-29-2007 at 04:26 PM.
    CURRENT: (mild OC)
    P5W DH Deluxe Rev 1.02G/66MOAG (BIOS: 2602); CPU: Q6700 (G0, wk 23) @ 3.0G; FSB: 300
    MEMORY: OCZ OCZ2G11002GK 2x1gB or 4x1gB PC2-8800; vDIMM = 2.15vdc; 500mhz; 3:5; 5-5-5-15/18; 6113/6093
    HSF: Thermalright SI-128 w/120mm; LOADED TEMPS: CPU: 121f/49c; Cores(avg): 143f/62c; MEM: 102f/39c; AMB: 72f/22c
    GFX: AIW 2006 Edition PCIE; PSU: Seasonic S-12+ 550W; FANS: 4 x 120mm; 2 x 80mm (all low RPM, low noise)
    DRIVES: 7200.10 250G (x2); 7K500 500G (x1); 7200.10 400G (x2); 7200.10 250G (x1); ADDED Controller: Adaptec 1430SA PCIE
    AUDIO: X-FI Elite MOD: http://www.esnips.com/web/X-FIOpAmpandCapModification OPTICAL: LiteOn: DH-20A4P, LH-20A1H; BUILD LINK: http://www.esnips.com/web/ConroeReady

  10. #6160
    Xtreme Member
    Join Date
    Sep 2007
    Location
    USA
    Posts
    244
    Quote Originally Posted by bichi View Post
    P5WDH; Rev 1.02g; 66M0AG; (July 2006); Q6700 G0 @ 3.0G; BIOS: 2302
    - switched from QX6700 B3 to Q6700 G0, Aug 23, 2007
    - stable @ 300FSB with either QX6700 B3 or Q6700 G0
    - never a problem with memory @ 1000, 3:5, 5,5,5,15
    - EZFlash USB flashdrive method
    - use Speedstep, Vcore settings not tested
    - no problems with "onboard audio" staying disabled (X-FI F1 installed)
    - or any other BIOS settings
    - all QFan PWM settings disabled
    - no radical performance change
    - temps all nominal (Q6700 G0)
    - AMB: 71f/21.6c; case closed
    - approx 35watt less AC power, same machine clock/specs/parts, than QX6700 B3 (measured with WattsUpPro)
    - specs/details in sig below

    OCCT TEST @ 24min with CPUZ, Coretemp, MB Monitor:
    http://www.esnips.com/doc/6474e6d5-b...2-OCCT-1-24min

    OCCT TEST 1sec before end (shows idle temps/SpeedStep Vcore):
    http://www.esnips.com/doc/565d658f-a...CT-2-00min-end
    same rev 1.02 mobo and same issues with the cpu it looks like only the newest rev 1.04 that sucks but hey what do you expect from a mobo that was never setup for quad in the first place. that is when it was first put out.
    Silverstone FT02
    Asus Maximus III Formula, Intel i7-875k, Corsair 4x2gb Dominator 1866mhz
    SLI EVGA GTX 580s, PCI-E X-Fi Audio
    2x WD Raptor 600gb sataIII Raid 0, 2x1tv WD SATA Black Raid1
    Thermaltake W0133RU 1200W
    Windows 7 Ultimate x64, Dell 2310 3d lcd

  11. #6161
    Xtreme Member
    Join Date
    Sep 2006
    Location
    Silicon Valley, CALIF
    Posts
    120
    Quote Originally Posted by Creek Tha Gray View Post
    same rev 1.02 mobo and same issues with the cpu it looks like only the newest rev 1.04 that sucks but hey what do you expect from a mobo that was never setup for quad in the first place. that is when it was first put out.
    Had a P5WDH, board Rev 1.02g, but "69M0AG" on the box tag, as opposed to "66M0AG," that was not as stable at 300FSB and QX6700.
    - so it may be the boxtag that's the differentiator and not just the board rev...
    - the 66M0AG has been working great since July 2006, 6700 QX B3 or Q G0 @ 3.0g, with either 2 or 4gig RAM @ 500/1000, 3:5.
    - not as stable at FSB320/3.2g and 4gig RAM, however...
    CURRENT: (mild OC)
    P5W DH Deluxe Rev 1.02G/66MOAG (BIOS: 2602); CPU: Q6700 (G0, wk 23) @ 3.0G; FSB: 300
    MEMORY: OCZ OCZ2G11002GK 2x1gB or 4x1gB PC2-8800; vDIMM = 2.15vdc; 500mhz; 3:5; 5-5-5-15/18; 6113/6093
    HSF: Thermalright SI-128 w/120mm; LOADED TEMPS: CPU: 121f/49c; Cores(avg): 143f/62c; MEM: 102f/39c; AMB: 72f/22c
    GFX: AIW 2006 Edition PCIE; PSU: Seasonic S-12+ 550W; FANS: 4 x 120mm; 2 x 80mm (all low RPM, low noise)
    DRIVES: 7200.10 250G (x2); 7K500 500G (x1); 7200.10 400G (x2); 7200.10 250G (x1); ADDED Controller: Adaptec 1430SA PCIE
    AUDIO: X-FI Elite MOD: http://www.esnips.com/web/X-FIOpAmpandCapModification OPTICAL: LiteOn: DH-20A4P, LH-20A1H; BUILD LINK: http://www.esnips.com/web/ConroeReady

  12. #6162
    Xtreme Member
    Join Date
    Sep 2007
    Location
    USA
    Posts
    244
    Quote Originally Posted by bichi View Post
    Had a P5WDH, board Rev 1.02g, but "69M0AG" on the box tag, as opposed to "66M0AG," that was not as stable at 300FSB and QX6700.
    - so it may be the boxtag that's the differentiator and not just the board rev...
    - the 66M0AG has been working great since July 2006, 6700 QX B3 or Q G0 @ 3.0g, with either 2 or 4gig RAM @ 500/1000, 3:5.
    - not as stable at FSB320/3.2g and 4gig RAM, however...
    my box is 6AM0AG from zipzoomfly on 10/16/06
    Silverstone FT02
    Asus Maximus III Formula, Intel i7-875k, Corsair 4x2gb Dominator 1866mhz
    SLI EVGA GTX 580s, PCI-E X-Fi Audio
    2x WD Raptor 600gb sataIII Raid 0, 2x1tv WD SATA Black Raid1
    Thermaltake W0133RU 1200W
    Windows 7 Ultimate x64, Dell 2310 3d lcd

  13. #6163
    Registered User
    Join Date
    Sep 2007
    Posts
    15
    can anybody tell me what is the best bios to overclock and stability?? i have p5w dh deluxe rev 1.04g, and if want to downgrade the bios, how can i do ?? because the asus update doesn´t do that

    thanks

  14. #6164
    Xtreme Member
    Join Date
    Sep 2007
    Location
    USA
    Posts
    244
    Quote Originally Posted by Donseba View Post
    can anybody tell me what is the best bios to overclock and stability?? i have p5w dh deluxe rev 1.04g, and if want to downgrade the bios, how can i do ?? because the asus update doesn´t do that

    thanks
    we need to know what cpu you have and what bios you currently have installed.
    Silverstone FT02
    Asus Maximus III Formula, Intel i7-875k, Corsair 4x2gb Dominator 1866mhz
    SLI EVGA GTX 580s, PCI-E X-Fi Audio
    2x WD Raptor 600gb sataIII Raid 0, 2x1tv WD SATA Black Raid1
    Thermaltake W0133RU 1200W
    Windows 7 Ultimate x64, Dell 2310 3d lcd

  15. #6165
    Xtreme Member
    Join Date
    Dec 2004
    Posts
    453

    getting more

    Well after poking and prodding with high volts all night I am getting more out of this new Quad core. Tonight I am able to run stable and smooth at 396 fsb instead of 390. I can boot and run for awhile at 403 but it isn't stable enough for anything. Last night when it was a virgin it would not boot where it runs smooth at tonight. It has seen volts as high as 1.675 today and tonight, but now it is running nice at 1.6 in bios. here is a shot of my latest 3D06.
    I am running the memory, all 4 sticks on turbo, with 2.3V 1:1 with my timings set at 3-3-3-5. Soon I will be over 400 and climbing.
    As you can see temps are not a problem!

    You just gotts love that CPU Score!
    Oh and this is for you doubters
    http://service.futuremark.com/compare?3dm06=3210179


    WZ

  16. #6166
    Registered User
    Join Date
    Sep 2007
    Posts
    15
    Quote Originally Posted by Creek Tha Gray View Post
    we need to know what cpu you have and what bios you currently have installed.
    i have a C2D e6420 and the bios 2206

  17. #6167
    Xtreme Member
    Join Date
    Dec 2004
    Posts
    453
    You knw Donseba I preferred the 2004 bios the 1707 bios and if you want to stay more current although it it really does not offer anything as far as real improvements go, the 2301 bios. It's just that the 22xx bios revs. were just horrible for my system.

    WZ

  18. #6168
    Registered User
    Join Date
    Aug 2006
    Location
    United Kingdom
    Posts
    28
    Quote Originally Posted by bichi View Post
    - no problems with "onboard audio" staying disabled (X-FI F1 installed)
    - or any other BIOS settings
    The issue is that the "onboard audio" and the "serial port" stays enabled, "NOT" disabled.
    Asus P5W DH Deluxe
    Intel Core 2 Duo E6850
    Zelman CNPS9500 AT
    Crucial Ballistix PC2-8500 4x1GB
    BFG GeForce 7800 GTX OC 256MB
    Enermax Galaxy DXX EGX1000EWL 1000W
    Western Digital Raptor WD1500ADFD x3
    Pioneer DVR-115DBK x2
    Plextor DVDR PX-716A
    CoolerMaster Stacker 830 Evolution

  19. #6169
    Registered User
    Join Date
    Sep 2007
    Posts
    15
    and how can i pass from the 2206 to 2004 bios ?

  20. #6170
    Xtreme Member
    Join Date
    Dec 2004
    Posts
    453
    Donseba you will have to go and snag afudos 211 load it onto a floppy along with the 2004 bios image stick it in the floppy drive go into bios and set your floppy as your first boot device and boot. it will go right on into a dos boot and just do what is needed to install. Now if you have done something wrong it will let you know that it can't read your bios or whatever. do not panic just pop out the floppy and restart it will boot with your current bios and then start again. when I went back I edited the number portion off of the bios.
    Instead of putting P5WDH2004.rom on the floppy. Rename it to P5WDH.rom
    this is how i went back from 22xx. Still if you are going back I think i would fall back to 1707, run it for awhile and see how you like it. if you don't then load up 2004. stay away from the 19xx bios' as for me they sucked too.
    Good luck, you can read tutorials on using afudos, it is really easy but, for a first timer it can be nerve racking doing this stuff. If you totally screw the pooch there is asection on bios recovery in your P5WDH manual.
    If you read up you can do this!!

    WZ

  21. #6171
    Xtreme Member
    Join Date
    Jan 2006
    Location
    Alta Loma Ca.
    Posts
    308
    used to disk one for dos boot and one with afudos and bios boot to the boot disk then put in the afudos and bios fallow the directions good luck
    rich
    rampage 2 extreme cpu 17920 Do memory kingston 1600 1x3 video ati 4890 1gig psu corsair 750 Tx cooled by ultra120extreme 120 fan @2000 rpm 2xraptors in raido
    case CM storm sniper

    My Heatware

  22. #6172
    Registered User
    Join Date
    Nov 2006
    Posts
    7
    I want to change my ram, now im using corsair xms2 6400pc cl4 2x512. im looking for sth not expensive 2x1GB pc6400 which will allow me to set them 1:1 with 400fsb. I had some problems with corsair while there were working in dualchannel with 400fsb(errors in memtest random sequence number).

    what do you think about it?

    i have upgraded bios to 2301 and it seems to working fine for me with 400fsb... So i dont know what to do now, buy 2x1024mb or buy another pair corsair 2x512?
    Last edited by tompl; 10-01-2007 at 02:11 AM.

  23. #6173
    Registered User
    Join Date
    Sep 2006
    Posts
    22
    Quote Originally Posted by Donseba View Post
    and how can i pass from the 2206 to 2004 bios ?
    Turn on the Asus update, choose Options and put a mark on Bios Downgradable. Then you can flash the older bios.
    Asus P5W DH Deluxe || Core 2 Duo E6600, Scythe Ninja+ || 2x1Gb Crucial 800
    Sapphire HD 2600XT, VF900
    || WD & Samsung 320GB T166 || WD 750GB GP
    Seasonic S12 430W || LCD Samsung 226BW

  24. #6174
    Xtreme Member
    Join Date
    Sep 2006
    Location
    Columbia, SC
    Posts
    183
    Planning ahead to my next CPU purchase, I have a potentially dumb question.

    If I get a 3+Ghz Penryn with as many cores as I can afford, it'll require bumping the FSB up to 1333Mhz just to be on-clock. Would that still need to be treated as overclocking when it comes to the other BIOS settings, or would Auto be OK?

    My target for this machine was 3Ghz and I never quite made it, and if going "stock" with a new CPU would do it, that's the way I'd prefer to go now...
    P5W DH Deluxe 1.02G
    Q9450 @ various settings like underclocked to 2.32Ghz until a good BIOS comes along...

  25. #6175
    Registered User
    Join Date
    Nov 2006
    Posts
    19

    Question..

    I have this Mobo(obviously) and I currently have:
    E6600
    2x1GB Crucial Ballistix PC6400

    Should I upgrade to:
    Q6600
    4x1GB Crucial Ballistix PC8000

    Or should I just get another stick or 2 of PC6400? I don't know which is better memory wise nor processor wise on this board. I am assuming quad core for twice the l1 and l2 cache. Let me know, thanks!

Page 247 of 340 FirstFirst ... 147197237244245246247248249250257297 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •