Quote Originally Posted by Jodiuh View Post
This might be better off in the TRUE thread, but I'd appreciate if you guys could weigh on a temp situation here. The chips an E6400 @ 3500. I'm now @ 500 and the only limiting factors the heat so far. The TRUE's mount is solid, TIM applications fine, cpu and heatsink have been lapped sufficiently, but the pipes do not feel hot and I don't think it's pulling the heat away like it should.

cpu fan: Scythe SFLEX E 120mm @ 1200RPM
intake fan: 3 SFLEX E
exhaust fan: 2 SFLEX E

vcore: 1.475 bios
drop: 1.43/1.44 uguru/windows
droop: 1.41/1.42 orthos blend

room temp: 26C
idle core temp: 50C
load core temp: 65C

Doesn't that seem a little high? Thanks!!
the temp might be a wee bit high for othos blend...am i understanding right that you have 3 intake and 2 exhaust fans for your case?...what is the rpm for those fans?

the other issue is your cpu fan speed...i think is a wee bit low for orthos blend.