Asrock 775Dual-VSTA Volt Mods

[Jor3lBR]

DDR2 PC2-6400 is an excellent choice for this mobo considering it is very cheap and easily capable of running at the max possible FSB quoted for this mobo of 340MHz.

Personally have been using 2x1Gb Geil Ultra PC2-6400 at 3-3-3-9 and 320MHz fsb on a 4coredual mobo for some time now with no problems whatsoever.

Thanks for all the tips guys, but turns out that is the e4400 that's crapping out on me

The mems are fine, they are running 2-2-2-2-5-1t (400mhz) with 315fsb.

Passes all memtests overnight and s&m. But the processor is giving Orthos error with 8k and 10k fft (cpu stressing).

Raising the vdd and vagp doesn't help at all. Same error with 10k fft.

My cpu is currently running 1.525v do you guys think that I should give more volts or did I reach limit of this cpu on this board?

Current temps with watercoling 7v:
- 33-35o.C idle
- 50-55o.C load

Readings are from TAT, Everest gives -10oC. on all temps.

Thanks again!