Striker pwns EVGA with Q6600 G0

[nugzo]

not sure if nugzo made any adjustments, but these are the settings I sent him earlier.

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1700
Actual FSB (QDR), Mhz: 1700
MEM (DDR), Mhz: 850
Actual MEM (DDR), Mhz: 850
Vcore Voltage:1.625 for actual of 1.52
Memory Voltage:2.05
1.2v HT Voltage:1.75
NB Core Voltage:1.5
SB Core Voltage:1.7
CPU VTT Voltage:1.5
DDRII Controller Ref Voltage: auto
DDRII Channel A Ref Voltage: auto
DDRII Channel B Ref Voltage: auto

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS:12
Command Per Clock (CMD): 2


Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 101
PCIEX16_2 Frequency (Mhz): 101
PCIEX16_3 Frequency (Mhz): 101
SPP<->MCP Ref Clock, Mhz: 201

I used those exact settings, except i did the vdroop pencil mod so my bios is set at 1.55. for 1.54 windows/loaded

I'm playing with my Evga board for another week, if I cant get it running right in that timeframe I'm returning it and getting a Striker or IN9-32MAX. I'm used to my 975x board so this 680i board has been a nightmare. Nugzo, did you watercool the mosfets as well? Any pics? What MCP is on the striker board, 570??

570MCP on the striker, yes cooling the mosfets and NB with water. SB is air cooled. I have some pics here. not real MB detailed though.

nice.. what revision is your current striker extreme Nugzo ? made in china or taiwan ? serial number ?

Not sure eva. I'll check when i get home. I do know that the bios chip is non removable where on the earlier strikers you could just pop it out.

max fsb stable overclock at lower multi?

On 8 multi i had problems at 463 FSB. would freeze on post screen. I havent checked for max fsb yet on lower multi. I will though.