Micron D9 Users: Post your 24/7 voltages!

[Falkentyne]

Are you guy saying the SPD dying is what is causing all these dead D9 problems? Because as I said in the thread i made, mine just died too. At *2.0v*. Was working fine then Maplestory crashed (and no idea if it was video card or CPU, as I haven't power cycled the computer in awhile), then no POST from *either* dimm.

Surely both sticks can't go from 100% working to 100% dead just like that >.> Especially with no errors in windows before?

[GMX]

Are you guy saying the SPD dying is what is causing all these dead D9 problems? Because as I said in the thread i made, mine just died too. At *2.0v*. Was working fine then Maplestory crashed (and no idea if it was video card or CPU, as I haven't power cycled the computer in awhile), then no POST from *either* dimm.

Surely both sticks can't go from 100% working to 100% dead just like that >.> Especially with no errors in windows before?

Similar thing happened to me. 100% working, no errors. Then in the first complete power cycle it wouldn't work. Flashing SPD did fix it, but then more power cycles kept killing or corrupting it. I got sick of sealing up 233 pins on the module to flash it each time. Just got new kit of 8500 Crucials.

I will consider trying to get a new SPD chip mounted on the problem module, and see what happens. But not anywhere in the short term.

[Soulburner]

Ballistix 6400 2x1Gb

Set 1:
460x7 1:1 = DDR2-920 5-5-5-15-30-2T 2.0v

Set 2:
400x9 4:5 = DDR2-1000 5-5-5-15-30-2T 2.0v

Did not test their max, however 1.9v is not error free on either set at those settings.

[Atal]

does anyone know where I can buy the corsair 8000 UL the fat ones??? dont seem to find them anywhere :S i looked at their website and they dont have them anymore! thanx! btw I recently fryd my ram @ 2.5 volts it was doing 1280 mhz pretty staable but it was too much voltage! those kingstons wore a hell of an overclocker!!

[Super Nade]

4 x 1 Gb PC6400 Ballistix ($60 a set ) @ 486 MHz 4-4-4-12 2.2 to 2.3V

[funnyperson1]

2x1GB Ballistix @480ish 5-5-5 at 2.1V
About 2-3 months?

[doakh]

4x1Gb G.Skill 6400 HZ 486Mhz (1:1) 4-4-4-12 at 2.25v

Is it better to increase your memory voltage or your northbridge voltage.
I had my vMem at 2.30 and my vNB at 1.45, but it was only Orthos stable
for about one hour. I changed the vMem to 2.25 and vNb to 1.55 and
it ran all night. The northbridge felt rally hot, so I put a 92mm fan blowing
on it. My motherboard temp dropped 3C.

P5b Deluxe (Bios 1212)
E6600 486x7 = 3.41Ghz at 1.42v
vSB: 2.60
Sapphire X1950 Pro 512MB
Antec NeoHe 550W
Antec P182

[OgaiB]

2Gb Team DDR2 PC2-6400 Xtreem Series 3-3-3-8 Dual Channel kit TXDD2048M800HC3DC + 1Gb Team DDR2 PC2-6400 Xtreem Series 3-3-3-8 Dual Channel kit TXDD1024M800HC3DC at 2.35V 24/7, 4-4-4-8 500Mhz on EPoX Optimus EP-AF590 SLI2, AMD X@ 5200+@3Ghz(250X12)

[OdinEidolon]

tracers 8500 dual sided (2.2V stock)
4-5-5-15 1000MHz 1.9V

[WaterFlex]

2048MB CellShock PC2-9200 CL5 KIT "Red Devil". Micron D9GKX (best chips in the world )
4-4-4-4@1000MHz@2,08V
Additional 2048MB of "Red Devil" are shipping into my PC

[mad_skills]

2x1Gb Crucial Ballistix 8000C5 (D9GMH) + 2x1Gb Corsair Dominator 8500C5D (D9GMH or D9GKX not sure) @ 800MHz 4-4-4-4 1.8V atm. Need to swap windows then they are going to get tormented.
Earlier, Dominators worked at 1140MHz 5-5-4-5 @ 2.14V on their own.

[garson]

Tracers 8500 dual sided, 5-5-4-6@1112Mhz, 1.95V.

[vab206]

Brand: Corsair XMS2
Speed: 1200MHZ DDR2 (see validation in sig)
Voltage: 1.90, see This Video for explination, yes thats me

[CryptiK]

2 x 1GB TeamXtreem 8500

DDR 1186, 5-5-5-15 @ 2.17v (real)

DDR 1333, 5-5-5-15 @ 2.29v (real)

DDR 1100, 4-4-4-12 @ 2.29v (real)

[zsamz_]

ballistix 8500
16fd3 1240 2.05v /1332mhz 2.4v
16fd3 1200 1.98v
16fd5 1200 2.0v


hyperx 8500 + team cas3
3-3-3-8 830 2.24v

kingston value
1000 4-4-4-8 2.22v
1200 cas 5 2.3v

[Computerville]

6144MB OCZ SLI@5-4-4@2,1v

[fatguy1992]

I use 2.08v at 1066MHz @ 5-5-5-12 on my Corsair Dominators.

[clem9]

for me:
crucial value 6400 (d9gkx)
1000 mhz - cl 5-4-4-4
1,8 V

[OdinEidolon]

for me:
crucial value 6400 (d9gkx)
1000 mhz - cl 5-4-4-4
1,8 V

holy crap that's some nice results for a value kit man! didn't know that crucial values had d9!

[WaterFlex]

for me:
crucial value 6400 (d9gkx)
1000 mhz - cl 5-4-4-4
1,8 V

Your system is absolutely UNSTABLE. Useless 24\7 voltage.

[clem9]

Your system is absolutely UNSTABLE. Useless 24\7 voltage.

so why is it unstable?
this are my settings so i know that they are stable..

here a screen with 5-4-4-12, i can do 5-4-4-4 if u want to.

[WaterFlex]

clem9, I see your freq and timings. But give me your official DRAMvoltage with everest or any other program.

[clem9]

windows just can't read it, but i can take a picture with a multimeter!

[WaterFlex]

windows just can't read it, but i can take a picture with a multimeter!

I think under Linpack your system will turn into ustable.

[clem9]

ok my mobo is overvolting just 0,13 v :x
it's bios 1,8 and 1,93 with multimeter...