Asrock 775Dual-VSTA Volt Mods

[Jor3lBR]

Humm I can't help you on that, my mobo is a 4coredual-vsta and I'm using the 2.0 original bios.

I completed your vdd, vddr and vagp mod yesterday (finally), and the mobo is ready to fire. I replace the cheapos capacitors too.

I was able to boot right away with 335*10 with my E4400. Did some memtests and m-prime for about 4 hrs.

Didn't go further because I was just shaking down (using the intel standart cooler). I will put the mobo in case and turn the watercooling to see how further it can go.

Thanks for the tips.

EDIT: turns out that the board wasn't booting in 335*10 with the e4400. My bad. 335*10 was with an e6600 sorry about that I was testing both but didn't release at the time witch was I was using.
Max boot with the e4400 315*10 and mem timmings 1t 22225 ddr1 gives a reading average of 6300-6400 on everest.