E6600 + Asus 680i Striker Extreme

[optical10]

Drop the 9 multi to 8x to get the cpu out of the equation

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1511 (means 378FSB) --> try 1600
Actual FSB (QDR), Mhz: 1515 -->1600
MEM (DDR), Mhz: 900(means mhz speeds) --> set 800
Actual MEM (DDR), Mhz: 895.2--> 800
Vcore Voltage:1.425 --> 1.475 will give real 1.43 normally enough for 3.5 - 3.6 stable operation for older batches newer need 1.5-1.55 reall Vcore for 3.6
Memory Voltage:2.2
1.2v HT Voltage:1.3--> 1.4
NB Core Voltage:1.4--> 1.45
SB Core Voltage:1.55
CPU VTT Voltage:1.4--> 1.45
DDRII Controller Ref Voltage: auto
DDRII Channel A Ref Voltage: auto
DDRII Channel B Ref Voltage: auto

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS:12
Command Per Clock (CMD): 2
clock 2T --> if the rig runs stable at 1600/800 drop to 1T try again then

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200

[/QUOTE]

Hi Leeghoofd

Do you think your settings for E6600 above will work with a Q 6600 + striker extreme?

Currently I'm stuck at

Stable = 3Ghz, FSB 1333 1.2v, 335.7 x 9, RAM 416.7 MHz FSB Dram 4:5 5-4-4-19 Auto.
Un-Stable = 3.1GHz, FSB 1378 1.35v, 344.5 x 9, RAM 430.6 MHz FSB Dram FSB Dram 4:5 5-4-4-20 Auto

Some users say there holes so I should just go higher with more Volts?

Any help appreciated, Optical10. how is the second cube coming along?