Quote Originally Posted by fornowagain View Post
Why not put a few more volts through it for a bit to see if that cures it? You're expecting a lot for that to be stable at 3.3GHz if its dropping to 1.26v. I'd set to about 1.48v to see the actual around 1.4v and see what happens, you won't hurt it, just keep an eye on temps. Same goes for the MCH and VTT, just bump them up, when you find the cause slowly drop them and check the results.
Exactly what im doing now 1.39 bios/ 1.31 load, stable for 3 hours now on prime. I bumped up the MCH and ICH voltage one notch as well. Temps are looking ok, 57 core 0&1, 50 core 2&3. Looks like i was just expecting to much from not enough voltage.....