Quote Originally Posted by C-N View Post
My board works great with a 1066fsb CPU & I have seen others at 4GHz with a 1333fsb cpu so I dont think the board is to blame unless you got a duff one.

2 Ram modules @ 2.15v MCH:1.37v Vcore:1.62v ICH:1.12v all the rest minimum/stock.

CN
That's weird. Cpu-z states 475FSB while Coretemp states 528.76 But Orthos states that it's the higher FSB.

Quote Originally Posted by strange|ife View Post
Iam doing some testing, i have the same g.skill the other guy has. This board may have some problems with quad and 4GB. Iam having alot of issues since going too G0

iam about to shut down and install my e6600 and just 2gb, then 4gb of ram. which i had for a couple of months before getting quad with no issues. if i still see the random freezes etc in games and during installs. Iam gonna rma for a new one, and my proc! lol

Drives are fine, ive ran multiple test on them, and swapped them into another machine, and have no issues transfering files over.

i have a 700w gamextreme, 2 tier psu. Its been reliable for a year, and i tested rails on a dmm last week when i first got my G0. under load i saw no issue on the DMM. And after yanking out the 8800 , and putting a 6600, minus 2 drives, and almost no fans. and still a bunch of freezes..iam at a loss, it all worked for 3 days with the quad..and took a nose dive

and i dont really push stuff hard at all. Except for that quick sucide run i did !! LOL

First though i took out 2 sticks of my 1gb g.skill 6400 HZ's..gonna run some games, and 3dmark and see if it still locks.

then pry the HSF off next if it happens..
Crappachuwee! I just ordered my q6600 g0 and I have 4x1gb of ram. I hope this doesn't happen to me.

BTW, if I go in the bios and set the timings 4-4-4-12 1t, do I need to worry about all the other timings about the memory or just set them to auto. I'm scared if I set them to auto, they will be set to a lower setting than default.