Quote Originally Posted by SpinCykle View Post
Well i finally set up the new computer. I still need to update the bios to ver. 11 but here is what she looks like right now. The temps bother me a little for being on water. I followed AS Crem. Instructions to a "t" but i still get these wierd differences in core temp. I have C1E and ESIT dissabled in the bios ATM. If i enable those the temps drop but for some reason it "underclocks" the cpu when im not doing anything.
C1E cuts back power to your cpu and EIST reduces the multiplier down to 6x to help with saving power by having less clocks on the cpu.

On a side note I booted at 2.997Ghz/333mhz, 1:1, 1.25 Vcore, 2.2 mem voltage and the temps didnt look to bad. Ran a 5minute small ftt stress test and the max temp's i saw were 47C core 0,2 42C core 1,3. Seems my cores 1 and 3 run 5C cooler than 0 and 2.

Do you guys think my temps are high for being liquid?
what is your room temperature?

the temp for a 3.0 ghz stress run appears to be ok....when you go higher then you (we) will see how that water system is hacking the program.