**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Chri$ch]

@Chri$ch
Try CPU VTT/FSB VTT voltage 1.35v and NB Core voltage 1.45v. Start from there with exact *timings* as you had on Gigabyte board. Set Perfomance Level to 5 manually and set all Channel/DIMM CLK fine delay to 1 (depending on your bios, you'll be able to tweak either DIMM 1 & 2 or all DIMMs, 1 & 2 & 3 & 4). From there test stability and raise CPU VTT/FSB VTT voltage and NB Core voltage. I needed VTT 1.53v and NB 1.53v to reach DDR1240 32M superpi stable. 1 and 3 Channel/DIMM CLK fine delay is a sweet spot if you're doing 600Mhz+ on your ram. Also set Enhance Data transmitting: FAST and Enhance Addressing: FAST, unless you want to loose 1/6 of your total bandwidth.

Thx, but wont help me. I think the best thing i can do is to buy a ballistx kit

Btw a pic of my system



max stable FSB with E6550 (cpu cant do more ).