I'm using the stock, I noticed heatpipes getting warm, northbridge hot and digital pwm flaming hot. This is a good indication of good heat transfer, I tightened all of the screws holding heatpipes, they were somehow loose. I also tried using the trasnspiper & AS5 on digital pwm, this thing works like a dream, easy 20C off while priming.Originally Posted by Grinch
There's no option in the biosno results with 1t? or is the option not in the bios?. And a last I have some 24/7 result, this mobo is a complete b*itch to tweak, when I got it first day I couldn't break 1100DDR barrier with tracers @ 2.4v.
- Something like 2.12v load on ballistix.
- Performance Level 5
What got me stable is FSB VTT 1.53v & NB Core 1.5v. My FSB wall was somewhere around 480Mhz but it just takes too much time tweaking GTL Ref voltages. I should have Prime95 results next week when I get fresh AS5, the one I have is over 3 years old and it's very hard to spread out on the cpu, feels like clay.
Anybody had a problem when one day your board was rock stable and next day it was failing memtest at exact same settings. I found out that one day my board likes FSB VTT 1.35v and adding more ruins stability, other days it need more to stabilize. Today I'm pulling 1.53v through it
Reply With Quote
Bookmarks