These modules can run 06 at 940-950mhz 7-6-5-15-1T 2.25vOriginally Posted by BenchZowner
And crank up the voltage ( they handle 2.25-2.35V just like D9GMH handles 2.65V for benching ), 1800 7-6-5-18 1T Command Rate should be possible with 2.25V
Not all dividers/fsb combos are working with the high ln2 speeds.
With conroe at 535-540x10, the memory can run exactly where it needs too. If I can get this quad clocking up to 530 I'm in
Hopefully it will get there eventuallyThese modules can run 06 at 940-950mhz 7-6-5-15-1T 2.25v
Not all dividers/fsb combos are working with the high ln2 speeds.
With conroe at 535-540x10, the memory can run exactly where it needs too. If I can get this quad clocking up to 530 I'm in
Did you try with a tad relaxed "performance level" ? Sometimes seems to help some dividers to clock a tad higher ( didn't thoroughly tested it ) [ but then again, we might have lower performance if the gains from the clocks ain't covering up for the internal chipset latency rise ]
Get well soon and give this CPU + VGAs a proper...OC harassment man
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.), Juan J. Guerrero
thats a sweet 01 result,
cant get over how good theese quads OC, its sooo nice
Hey thanx and good call on the PL's, actually did some of that today. Now just need to test on ln2.Hopefully it will get there eventually
Did you try with a tad relaxed "performance level" ? Sometimes seems to help some dividers to clock a tad higher ( didn't thoroughly tested it ) [ but then again, we might have lower performance if the gains from the clocks ain't covering up for the internal chipset latency rise ]
Get well soon and give this CPU + VGAs a proper...OC harassment man
Took out my 3dmark2006 single 8800ULTRA WR by 40 points at 5250mhz on ddr3 lol.
Using about 40mhz less core clock and 30mhz less mem clock on such a gpu bound benchmark(single) too. Could see scores getting near 22k with more gpu power. This one was about all I could handle today:
Can I come over and plug a card in for a few minutes
Well, that was not that bad, I think you were doing 'ok'!Hey thanx and good call on the PL's, actually did some of that today. Now just need to test on ln2.
Took out my 3dmark2006 single 8800ULTRA WR by 40 points at 5250mhz on ddr3 lol.
Using about 40mhz less core clock and 30mhz less mem clock on such a gpu bound benchmark(single) too. Could see scores getting near 22k with more gpu power. This one was about all I could handle today
Any issues with cold on the qx6850? I think I read -112 degrees somewhere... Does it work with even lower temps aswell?
Done deal Sham..."hell is coming to breakfast"
24k with default clocked cards, now just to get both cards clocking where they need to be on ln2 and it should be SICK.
Depends on the board really. This one doesn't tolerate cold like my qx6700.Well, that was not that bad, I think you were doing 'ok'!
Any issues with cold on the qx6850? I think I read -112 degrees somewhere... Does it work with even lower temps aswell?
Last edited by k|ngp|n; 08-17-2007 at 02:19 PM.
whats your take on ddr3 compared to hi grade ddr2 kingpin looks pretty awesome to me
24k on stock cards.. hihi
What a monster. These chips are disgusting, even on dry ice I've seen 4.9ghz '06.
Last edited by k|ngp|n; 08-20-2007 at 09:25 AM.
LOL that smilie, it fits lol
great job Vince
edit*
after watching that pic again, it seems you have the road to 27K stil open...
5.3ghz quad and +1000 on the core ^^
Last edited by BeardyMan; 08-20-2007 at 09:38 AM.
thank you k|ngp|n
Gaming: SaberThooth X79,3930k,Asus6970DCII_Xfire,32gb,120OCZV3MaxIOPS, ThermaTake Chaser MK1
HTPC:AMD630,ATI5750,4gb,3TB,ThermalTake DH103
Server: E4500,4GB,5TB
Netbook: Dell Vostro 1440
Awesome job as always my friend and good to know your recovery is coming along well. I'm sure this really brightened up your day.
Good job.
Where courage, motivation and ignorance meet, a persistent idiot awakens.
Wow you didn't just break the WR, you smashed it. Next question is whether or not 27k can go down.
Hopefully we'll see some response from the red team tommorow, but will it top 26.4k?
the score is soo sweet,
nicely done¨kp
that thing is rediculous
Current Setup:
-9850 GX2's in Quad SLI config
-Asus P5N32-SLI MB
-2x512mb of PC2-5300 DDR2
-Intel Celeron D OC'd to 3.2Ghz
-Windows Me with XP theme
-WD Caviar 20GB Hard Drive
-Zip drive
-Jazz drive
-3.5" floppy drive
-5.25" floppy drive
I think that score is a WR
Last edited by DMH; 08-20-2007 at 05:30 PM.
Good job
Awsome KP, but you covered GPU clocks :P
Awsome to see you back Vince!
I cant get any drivers validated on the ORB at the moment so I stoped benching when I noticed. Have e-mailed Nick about it. After a few modification to Blitz I managed to get it running ok. http://service.futuremark.com/compare?3dm06=2801368
Posting Permissions
Reply With Quote
Bookmarks