Water Cooled Case Gallery

[Patriote]

Its definately not a case of your U2-UFO being too much, it was simply inquiring why the repost when you posted your system already. Why not just edit your previous post with the new pics?

And yes I am the very same Dark Prodigy, however, I posted the same pics on the same page as the first pics of your system you posted on pg.181...Guess they got lost in all the reposts...

Thanks for the compliment though =)

Well, why would i edit a post that nobody would see anymore ? I mean, i post pics so that ppls can see and maybe that will give them ideas for future builds!

BTW: Ah so thats why that particular rig reminded me of something! I had seen it somewhere but couldn't pin-point out where.

____________________________________

I actually hate white lights and clean water My water needs to be colored or else ill think nothing is running through my tubing lol

But guys, all the fans are actually all Yate loons silent fans! Only the 3 pull fans on my rad are Scythes. And you guys see 2 custom fan controllers in front ? Well, i have full control over all the fans in my case. And let me tell you that when all are turned down, the case is super silent!

The cable management turned out to be not bad

Thanks for the kind words guys

[K_O]

Zostava:
CPU~ ~ ~ ~ ~Intel C2D E6300@ 3003MHz (7x429MHz) 1,41Vcore
MB~ ~ ~ ~ ~ Gigabyte P965-DQ6 bios F9
RAM~ ~ ~ ~ ~4x1GB Corsair Dominator TWIN2X 6400D4C@ 858MHz 5 5 5 15 2T 2,22V
GK~ ~ ~ ~ ~ eVga 8800GTS320MB @ 621MHz/1900MHz
ZDROJ~ ~ ~ ~Enermax Liberty ET500W fan @5V
HDD~ ~ ~ ~ ~Seagate Baracuda 7200.10 320GB
DVD~ ~ ~ ~ ~Pioneer DVR212 sata
DVD~ ~ ~ ~ ~Samsung SH183 sata
:CASE~ ~ ~ ~ Thermaltake Armor Jr. VC3000SNA intake fan Thermaltake Sleeve Bearing Fun 120 and outake fan Noctua NF-S12-1200 @5V

Chladenie:
Pumpa~ ~ ~ ~Swiftek MCP655B whitout speed controler
CPU~ ~ ~ ~ ~Swiftek Apogee GTX
SB~ ~ ~ ~ ~ ~Swifkek MCW30
NB~ ~ ~ ~ ~ ~Swiftek MCW30
GPU~ ~ ~ ~ ~ D-Tek FuZion GFX
Hadice~ ~ ~ ~Tygon R3603 1/2ID 3/4OD
Fitings~ ~ ~ ~ DangerDen HighFlow Fitings 1/2OD 3/8ID
Radiators~ ~ ~2 x Swiftek MCR320 whit 6 x Artic Cooling Fan AF120@7V
Expa~ ~ ~ ~ ~Cape Colpex Pro 250mm

Temperatur (27°C in room):
CPU: IDLE 27°C BURN 48°C(max po 30hod ORTHOSU)
GPU: IDLE 39°C BURN 43°C(max po 5hod 3Dmark06)
Chipset: IDLE 27°C BURN 45°C(max po 30hod ORTHOSU)

[perfection]

have you got any ramsinks on that 8800GTS of yours?? you should also put ramsinks on that mofsets of yours too

[K_O]

have you got any ramsinks on that 8800GTS of yours?? you should also put ramsinks on that mofsets of yours too

no i cant have it

[trouble2000]

My new rig My daughter aproves it

[Patriote]

Not a big fan of small tubing but damn... That looks great trouble2000! I like the cable management as well! Oh and cute lil girl you have there

Oh and can you say "Fingerprints mess?" lol

[ForeverAgain]

Quick ? about your rez, what is that tube that you have inside of it?

[YugenM]

Quick ? about your rez, what is that tube that you have inside of it?

I believe it's standard with the Alphacool Cape Coolplex reservoirs, it's an acrylic tube that prevents air bubbles from immediately getting sucked back in.

[burton]

very nice

[K_O]

yes. its cape colpex

[trouble2000]

Not a big fan of small tubing but damn... That looks great trouble2000! I like the cable management as well! Oh and cute lil girl you have there

Oh and can you say "Fingerprints mess?" lol

Tks! I just need something too cool the ram down now and i'll replace my psu fan because the current fan is wayyyy too noisy.

[Patriote]

Tks! I just need something too cool the ram down now and i'll replace my psu fan because the current fan is wayyyy too noisy.

Yeah mine is noisy as hell too! It's the noisiest thing in my case ATM. And i have about 14 fans in my case

[Marco André]

14fans? Thats a WR!

[kinghong1970]

My new rig My daughter aproves it

Question for ya...

is that a single loop of 3 radiators and 1 pump?

120 Rad @ front of case -> CPU -> 120 Rad @ bk of case -> NB -> 220 Rad @ top of case -> Graphics -> Pump ?

[trouble2000]

Question for ya...

is that a single loop of 3 radiators and 1 pump?

120 Rad @ front of case -> CPU -> 120 Rad @ bk of case -> NB -> 220 Rad @ top of case -> Graphics -> Pump ?

That's correct. Am i doing anything wrong? The pump is a laing LAING 12V DDC-1T.

[nitteo]

[pranko1]

Thats a sweet looking case nitteo

[[XC]Atomicpineapple]

My new rig My daughter aproves it

That is awesome! Might have to shamelessly copy that in the V1200B I've got on order.

[Waterlogged]

With only 1 DDC and 3 rads (1 a GTS), that's got to be restrictive as all hell. Making matters worse is the AGB res on the DDC.

[[XC]Atomicpineapple]

Well true, if you're refering to me copying the design I should have explained better. I'll be copying the overall look, loop layout will have to be different due to my hardware (see sig for a general idea). Trouble2000, do you have the sizes you cut the black acrylic down to still handy? If possible could you PM them to me?

[trouble2000]

With only 1 DDC and 3 rads (1 a GTS), that's got to be restrictive as all hell. Making matters worse is the AGB res on the DDC.

What do you mean by restrictive? I think the flow is alright, quite fast i think.

Well true, if you're refering to me copying the design I should have explained better. I'll be copying the overall look, loop layout will have to be different due to my hardware (see sig for a general idea). Trouble2000, do you have the sizes you cut the black acrylic down to still handy? If possible could you PM them to me?

As soon as i get home i'll pm you.

[Chri$ch]

[Grinch]

nice looking setup...

[deepsilver]

the lace don't fit in the case.

very clean system.

[tiro_uspsss]

lace? what lace?