Water Cooled Case Gallery

[Sparky]

The Dtrk logo when upright is on the bottom of the block, so then the outlet is on the upper right. Basically turn the block a quarter turn to the right.

Not sure on how to drain the system, I haven't drained mine before lol

[NickS]

The Dtrk logo when upright is on the bottom of the block, so then the outlet is on the upper right. Basically turn the block a quarter turn to the right.

Not sure on how to drain the system, I haven't drained mine before lol

LOL it isn't fun let me tell you that. For darkjedi's setup I'd either pull the pump out from under the PCI cards and set it in a bowl if the tubes are long enough, and pull one. If that wont work, I'd set a bowl under the res and pull the bottom tube out.

[Waterlogged]

DarkJedi, you could probably clean the loop up even further than stated by SparkyJJO. Here's what I would do on top of spinning the D-Tek, take the pump and stand it up under the res with inlet pointing towards back of case, have outlet go to rad, rad to Fuzion, Fuzion to GPU block, GPU block back to res.

As for draining, you can unbolt the res and undo the cap, turn it upside down into a bowl or something/somewhere else for reuse/disposal, and gently crack loose the top hose on the Fuzion to get a good flow going.

[funkflix]

Nice system Steffen!

Finished my system last night -

[Greg_1]

damn, the foto is gr8 and the rig also

[Sparky]

funkflix what case is that? That thing is huge! Big enough you could have mounted the rad internally methinks

[Grinch]

Nice system Steffen!

Finished my system last night -

nice looking setup...

funkflix what case is that? That thing is huge! Big enough you could have mounted the rad internally methinks

oh yeah rad could have easily fit in top...

[Greg_1]

I love that OCZ RAM cooler in black

[Patriote]

HEY GUYS! WE HAVE A KINK!

funkflix, is it just me or do i see a real bad kink that goes out of the SB then up in a res i suppose ?

[stormshadow]

HEY GUYS! WE HAVE A KINK!

funkflix, is it just me or do i see a real bad kink that goes out of the SB then up in a res i suppose ?

i saw that too but i'm guessing it's just the way that shiny black tubing reflects.

with a case that big and tubing that small, you'd have to try REAL HARD to get a kink lol

[Patriote]

i saw that too but i'm guessing it's just the way that shiny black tubing reflects.

with a case that big and tubing that small, you'd have to try REAL HARD to get a kink lol

Nah it really looks like a bad kink to me!

[Rob_B]

I zoomed in on that pic and it doesn't look like a kink to me.
But he could have routed that tubing a little nicer.
That 90deg elbow is pointed some what to the back of the case too.
So that tube is making an extra bend.

But all in all it looks great.

[stormshadow]

anyone know what kinda chipset blocks he's using?

[SafeFire]

Beautiful build there funkflix, thats a work of art

Though, I think I speak for a number of people when I say that a list of parts would be nice. I personally would be very interested in knowing what case that is (chieftec?) and what brand those waterblocks are of as I haven't seen that design around yet.

[Rob_B]

The water blocks look like they are Mips. http://www.mips-computer.de/

I would like to know what case that is too.

[deepsilver]

Nice system Steffen!

Finished my system last night -

nice mesh.
that black interior, the black tube and ramcooler look's great.

[funkflix]

damn, the foto is gr8 and the rig also

Thx!

funkflix what case is that? That thing is huge! Big enough you could have mounted the rad internally methinks

It is a Chieftec Mesh Big Tower, which i varnished with black paint.

nice looking setup...




oh yeah rad could have easily fit in top...

Thx!

I like the free room in the case, because i work a lot on my system! And sometimes i get called Mr. External.. It is my passion to make the radiators external.

I love that OCZ RAM cooler in black

Me too!

HEY GUYS! WE HAVE A KINK!

funkflix, is it just me or do i see a real bad kink that goes out of the SB then up in a res i suppose ?

Thx for the warning, but as stormshadow already said, it is reflection.

I zoomed in on that pic and it doesn't look like a kink to me.
But he could have routed that tubing a little nicer.
That 90deg elbow is pointed some what to the back of the case too.
So that tube is making an extra bend.

But all in all it looks great.

Thx!

Tubing is close to perfect imho, tried a lot of variations.

anyone know what kinda chipset blocks he's using?

Yes, they are from www.mips-computer.de.

Beautiful build there funkflix, thats a work of art

Though, I think I speak for a number of people when I say that a list of parts would be nice. I personally would be very interested in knowing what case that is (chieftec?) and what brand those waterblocks are of as I haven't seen that design around yet.

Thx!

Northbridge --> MIPS Freezer

Southbridge --> MIPS Freezer

CPU --> Alphacool NexXxos XP

GFX --> D-Tek FuZion GFX

Mosfet --> Heattrap

[SaII]

woah man, that's like uber hardcore

btw please explain steps to paint that OCZ cooler black

[Patriote]

Hell yeah, that look great! I like the Big brother

BTW: It still look a bit kinked?!

[Patriote]

Some pics i just took





Without Flash













Playing with colors



Night shot

[funkflix]

woah man, that's like uber hardcore

btw please explain steps to paint that OCZ cooler black

Buy some cans with black paint in it and just do it!

Hell yeah, that look great! I like the Big brother

BTW: It still look a bit kinked?!

It's hard to make good pictures with flash and few space, but i hope u will see now, that there is no kink!





Nice system Patriote, it looks great, but i do not like the covers of the fans.

[stormshadow]

nice rig patriote but you should do something about that kink.


lol.

[Patriote]

Buy some cans with black paint in it and just do it!

It's hard to make good pictures with flash and few space, but i hope u will see now, that there is no kink!


Nice system Patriote, it looks great, but i do not like the covers of the fans.

Ah now i see it

BTW: I didn't liked them either when i got them back a few months. I got used to them now. But when i bought the case, i couldn't find any Stainless steel 120mm fan grills. Those are the only ones i had found. Now, Performance PCs has some killer looking ones from kikbox. I was totally drooling when i first saw them. Then, i saw the price... For 6 of them, (4 in front and 2 on top) it would of cost me over 150$ CAD ... Way too much for me since i had just left my job

[Patriote]

nice rig patriote but you should do something about that kink.


lol.

Kink ? I see no kinks lol Not in my computer!

[funkflix]

nice rig patriote but you should do something about that kink.

lol.

Kink ? I see no kinks lol Not in my computer!