MMM
Results 1 to 25 of 416

Thread: Xtreme Low Q6600 G0 Temp on Air !!! (Lots of Pics)

Threaded View

  1. #11
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    186
    Quote Originally Posted by idiotekniQues View Post
    i also just got an L723A930 same as ICER.

    i easily expect 3.4 to be my 24/7 with this at great temps, on air.

    time to go lap and take this e6400 out for good and sell it to a lucky fella in georgia who can take it to its limits.

    excited to join all you other q6600 fellas in our quest to test these slacr's out.
    this stepping's VID is 1.300v as ICER's is, same stepping

    my ambient temps are pretty high in here about 80F which is about 27C so at 3.3ghz my voltage is at 1.375 in bios, 1.33v in speedfan idle and 1.28v in speedfan under prime95 load all 4 cores.

    temps are about 65-66 load under the above. all prime tests listed using small ffts.

    i want watercooling or to get my new apartment soon. if i was at a ncie 21-22C in my ambient, whole nother story.

    time to start researching a good affordable starter WC rig.

    i ran this chip at 1.4+v in bios and ran close to 3.6ghz with prime going on all 4 cores and temps were hovering at 70c which i dont like. again ambient temps messin me up on air.

    air is so dependent on ambient. i am measuring core temps in coretemp and voltage in the latest speedfan.
    Last edited by idiotekniQues; 07-27-2007 at 09:03 PM.
    Signature removed due to failure to follow Policies & Guidelines.
    Please read them, located at the top of the forums.
    Unapproved/Unaffiliated link.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •