Are new G0 chips really too good OCers? - No!

[ziddey]

Just received my E6750 L719A from PGN.

Threw it in my DFI P965-S. Old setup was 8x450=3600 1.5v. Wouldn't post at these settings, and after numerous up and down cycles, it went down to 8x266=2133 with 1.35v.

Able to get 8x400=3200 with 1.36v actual, but it pretty much ends there.

8x420=3360 with even 1.5v actual results in instant lockup. Tried ramming a dildo up vtt and vmch's ass to no avail.

Also, the coretemp readout is absolute bull. At idle, I see around 12'c in coretemp. At load, coretemp is around 30'c with 1.36v.

That said, the dfi cpu readout used to be pretty much identical to coretemp with my other c2d (e6400), so if that's still accurate, then temp's are around 41'c under load, which is the same as what I got with the e6400 and 1.36v.