Quote Originally Posted by Oldscarface View Post
14,xx
nice clocks! what bios settings did you use for commando ? i can't get any memory past 600-620+mhz stable with commando and 1001 bios

if you could provide the settings used with this template would appreciate it alot

Bios Template:
Extreme Tweaker:
AI Tuning: Manual
CPU Frequency:
DRAM Frequency: DDR2-533MHz (1:1 Divider), DDR2-667MHz (4:5 Divider), DDR2-800MHz (2:3 Divider), DDR2-889MHz (3:5 Divider), DDR2-1066MHz (1:2 Divider)
PCI Express Frequency: 100
PCI Clock Synchronisation: 33.33
Spread Spectrum: Disabled
CPU Vcore Voltage: Auto
FSB Termination Voltage: Auto
NB Vcore: Auto
Memory Voltage: 2.00v
DDRII Channel A REF Voltage: Auto
DDRII Channel B REF Voltage: Auto
DDRII Controller REF Voltage: Auto
SB Vcore (SATA, PCIE): Auto
SB Chipset Voltage: Auto

Asus C.G.I.: Disabled
Static Read Control: Disabled
Configure DRAM Timing by SPD: Disabled
- DRAM CAS# Latency: 4
- DRAM RAS# to CAS# Delay: 4
- DRAM RAS# Precharge: 4
- DRAM RAS# Activate to Precharge: 12
- DRAM Write Recovery Time: 6
- DRAM TRFC: 42
- DRAM TRRD: 10
- Rank Write to Read Delay: 10
- Read to Precharge Delay: 10
- Write to Precharge Delay: 10

Legacy USB Support: Disabled

CPU Configuration
Modify Ratio Support: Enabled
- Ratio CMOS Setting: 11x
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled
thanks