ASUS P5W DH - Problems + Fixes Thread

[Proendo]

I picked up the following to update my system a little

Intel E6420
Asus P5W DH Deluxe
Corsair Dominator PC2-6400 XMS2 4-4-4-12
Antec 650 Watt True Power Trio

First thing I did was crank all the following to their max voltage values.

FSB Termination Voltage 1.50v
MCH Chipset Voltage 1.85v
ICH Chipset Voltage 1.20v

I then Gave the CPU 1.5v in the bios. And the Ram its 2.1v

I couldn't seem to get past 3400 ghz at 1:1 so I figured that must be my limit. Especially since I was hitting 70 at full load on air!

So I then set it to 3200 and then reduced all the voltages untill stable.

Everything is still on air. Full load is around 59-63. and idle is around 31.


I guess my question is, Am I missing anything ? Or is this a pretty good setup? I think I covered most of the bios settings to get everything manually set. Any suggestions?

Here are some pics.