Genie BIOS Setting
NB Strap Select 266
Exit Setup Shutdown Mode2
CPU Clock Ration 8 X
CPU Clock 463
Boot Up Clock Auto
DRAM Speed 533
PCI Clock 100
Auto Detect PCI Clk Disable
Spread Spectrum Disable
CPU Feature
Thermal Management Control Disable
Limit CPUID Maxval Disable
PPM Function Disable
C1E Function Disable
Execute Disable Bit disable
Virtualization Technology disable
Frequency Nolimit Disable
Voltage Setting
CPU Voltage Setting +225.0mV (1.5v)
DRAM Voltage Setting 2.200V
VTT Voltage Setting 1.19 V
NB 1.25V Setting 1.40V
SB 1.5V Setting 1.5V
SB 1.05 Voltage Setting 1.05V
DRAM Timing
DDR Configuration Mode Auto
GTL+ Driving Strength Mode2
Enhance Data Transmitting Fast
Enhance Addressing Fast
DQ Calibration 5
Channel 1 CLK fine delay Auto
Channel 2 CLK fine delay Auto
CAS Latency Time (tCL) 4
DRAM RAS# to CAS# Delay (tRCD) 4
Precharge dealy (tRAS) 12
All precharge to Act Auto
REF to ACT Delay (tRFC) Auto
MCH ODT Latency Auto
Write to PRE Delay (tWR) Auto
Rank Write to Read (tWTR) Auto
ACT to ACT Delay (tRRD) Auto
Read to Write delay (tRDWR) 8
Ranks Write to Write (tWRWR) 6
Ranks Read to Read (tRDRD) 6
Ranks Write to Read (tWRRD 5
Read CAS# Precharge (tRTP) Auto
All PRE to Refresh Auto
i dont really recommend 1.6 for 24/7, but 1.55v is fine.
Reply With Quote
Bookmarks