Testing begins (littledevil pots/ln2)

[Jort]

temps compare? heatload...

grtz

[bazx]

temps compare? heatload...

grtz

lol jort i have been a bit lazy but i will do compare soon

here is a 1m done on the copper base pot/2003 /1:1 4.4.4.12 /-155@1.75v

[Misko]

try it with 1.85V and -130C it should be better which board?

[bazx]

commando

and you never no i need to get the temp prob closer to the base but will need ld to let me drill a small hole in his pot

[LittleDevil]

Really nice results bazx

Regards

[Brettbeck]

Nice work baz! Your x6800 is retail isn't it?

[bazx]

Nice work baz! Your x6800 is retail isn't it?

yes it is brett and it belongs to thickbrit he has alowed me to use it for a while

been having some fun this morning with 1m on the copper base pot

[SoddemFX]

He he - Nice clock speed

Good work Baz!

Tom

[bazx]

clock speed is fine for sure now i need some help to get that time down

hehe i have the fastest 1m in the UK

[Brettbeck]

Nice one Baz ! Windows 2003 for faster time .

[Misko]

yes it is brett and it belongs to thickbrit he has alowed me to use it for a while

been having some fun this morning with 1m on the copper base pot

Still on commando? Can u share vcore and temp?

clock speed is fine for sure now i need some help to get that time down

hehe i have the fastest 1m in the UK

Watching your picture I will do these:

hide clock, kill lan, hide quick launch and lock taskbar, these is just what I saw is wrong from picture

[dinos22]

bazx you should have gone for 3-4-3-x timings instead.......it would have been quicker than 3-3-3-x

[bazx]

Misko i am still on commando 6800@1.8v m/b is vdrop/vmod 1:1 /12x

unsure of core temp but pot is -150 12mm from the base

brett this windows 2003

dino i think you are right and will be trying that set along with 1:1/11x next

[dinos22]

you guys are very lucky with chips that can handle -150C pot temp

[Nosfer@tu]

you guys are very lucky with chips that can handle -150C pot temp

it is properly lower at the base but still very amazing.

My Freinds X3060 cooldbugs at -118

[dinos22]

it is properly lower at the base but still very amazing.

My Freinds X3060 cooldbugs at -118

-118C base temp or core temp

does speedfan report temps properly below -70C as i know it works fine with DRYICE

[LittleDevil]

Really impressive results my friend, you have really nice chip there

Did you already make holle for k-type in the bottom?

Best Regards

[sacha35]

Very impressive baz, has got to be a UK record for sure, well done mate on a good job.

[Misko]

Misko i am still on commando 6800@1.8v m/b is vdrop/vmod 1:1 /12x

unsure of core temp but pot is -150 12mm from the base

brett this windows 2003

dino i think you are right and will be trying that set along with 1:1/11x next

1.8v maybe u find it to low, try with 1.9v, u have beautiful CPU out there

[Misko]

5.5Ghz


time should go easy to 9.00secs no with some help of your friends

Flat nine is everything expect easy

[bazx]

1.8v maybe u find it to low, try with 1.9v, u have beautiful CPU out there

this chip belongs to a friend and i must be take care of it

so i will have to leave 1.9v for him to try

[Misko]

this chip belongs to a friend and i must be take care of it

Yes that's why I said 1.9V , I have tried 1.95V, next time I will try 2.0V of course there is no rule that higher voltage is better then lower but still I'm gonna try

[Nosfer@tu]

-118C base temp or core temp

does speedfan report temps properly below -70C as i know it works fine with DRYICE

base temp, Drilled 2½ mm in to the base core from the side, mounted and glued with Asetek thermal nasty studd thingy

Dont accualy remember the difference from base temp top bios temp.

So it is propperlu at -105 C for the cpu.


Cant we just do a Tcore mod ?

[bazx]

took all the advice given here and here is the results

still at same vcore 1.8v

link to full size image

http://www.net7.info/1/6800/cold/1m/1mfullsize.gif

[bazx]

took all the advice given here and here is the results

still at same vcore 1.8v

link to full size image

http://www.net7.info/1/6800/cold/1m/1mfullsize.gif

after i did this run the os got a bit flakey i think i turned of to many sevices