is it possible to flash the gigabyte 965 s3 (rev 3.3) with the DS3 f11b bios? or it will cause problems?i have read in a forum that its the same thing except the capasitors..so whats your opinion? does anybody tried that with success?
is it possible to flash the gigabyte 965 s3 (rev 3.3) with the DS3 f11b bios? or it will cause problems?i have read in a forum that its the same thing except the capasitors..so whats your opinion? does anybody tried that with success?
Last edited by Prof_Chaos; 04-23-2007 at 06:11 AM.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
I did some further testing on my E6600 with the new F10 DQ6 bios, and just finished a 12h Orthos run at 500x7 3.5ghz 1000mhz RAM 1:1 5-5-5-15.
The everest idle corevolt is 1.38v, and after droop it stays at 1.36v during the Orthos run. While I'm desperately waiting for the Ultra120 Extreme/Ultima90, this was done on AC Freezer Pro, and temps never went over 55C.
Seems my E6600 is a pretty decent chip..
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
Dont know who/what ever to believe, some guys said that the Gigabyte memory is a "mess", memory wont o/c and compability problems, Thats why I ordered ASUS P5K deluxe, after some readings, I realize that the Asus cooling really sucks, MOSFETS getting very hot, and they got some RAID probs, I am using a pair of Mushkin XP8500(D9MGH) is there anyone who can confirm it will work with the Gigabyte, atm that is holding me back to pick Gigabyte, I got to know today, So i can change my order tomorrow (last date), because I already payed :X So Any help much much much appreciated!!!
I think you're better off w/ any P35 motherboard, like my P5K Deluxe. I've had 2 DS3's, still using a rev. 3.3, and this a better motherboard in so many ways. The memory timings/bandwidth are amazing. And I don't know who has problems w/ temps, but I don't.
With plane old Crucial Ballistix pc2-6400 (800), I'm getting almost 10,00MB/s read, latency of 52ns, @ 1104 speed, normal voltage.
Currently just drifting along at 460x7=3.2.
Rig #1:___Silverstone TJ09, GA-EP45-UD3R, Q9550, 4GB G.Skill, XFX HD 5870, Thermaltake 850W, Vista X64, ASUS 1920x1200 VW266H Black 25.5" 2ms(GTG) 1920x1200
Rig #2:___Lian-Li PC-7 Plus II, P5K DLX (bios 1005), Q8400, 4 GB Crucial Ballistix, 8800GTS [640mb/G80], CORSAIR 620HX, Vista X64, Samsung SyncMaster 226BW 1680x1050
Acer notebook & netbook, iPhone, & Touch, etc.
.
Bookmarks