thanks ...yeah wire management is gonna get straightened out with my new mobo coming in a few weeks it didn't make sense
thanks ...yeah wire management is gonna get straightened out with my new mobo coming in a few weeks it didn't make sense
__________________________________
[ EVGA X58 Classified ]
[ Intel i7 920 ] --- D0
[ Sapphire 4870x2 ]
[ BenQ G2400WD 24" Monitor]
[ 3 x 2GB G.Skill Trident DDR3 ]
[ Corsair 850HX 850 watt PSU ]
[ Auzentech Prelude ]
[ beyerdynamic MMX300]
[ Logitech G15, G9 , G7, MX518]
[ Saitek X52 ]
[ 4 x Samsung Spinpoint F3 500GB ]
[ 1 x WD 150GB Raptor ]
[ 1 x Seagate 500GB 7200.11(32mb) ]
[ Windows 7 64-bit]
Water Cooling Setup
U2-UFO Black Powder Coat - 3 Big Window
Swiftech MCP-655 aka Laing D5 Vario w/ EK Top
Thermochill PA 120.3
Swiftech XT CPU Block
EK Classified Full NB/SB Block
EK-MultiOption 4 Port RES 150 Rev. 2
NZXT Fan Controller + Sunbeam Multi Fan Port
7/16" ID (5/8" OD) Primochill Black Tubing
7 x Yate Loons-D12SM ‘s
Bitspower Compression barbs
oy! its the christmas RAM!Originally Posted by 2000army
A friend of mine has the same memory as you and we always call it the christmas ram because of the green/red flashing. We also try not to sit next to him because its kind of disturbing
next setup overall though. I always like seeing those little swiftech heatsinks on VGA cards
Current setup: http://www.xtremesystems.org/forums/...postcount=1843
Not the neatest but does the job well....
here is direct link:
http://www.pbase.com/image/77394495
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
2000Army,
Nice project you have going there!
Charles Barkley
"Poor People have been voting for Democrats for the last 50 years ... and they are still poor."
Nothing really all that special here, but it works OK for me..........
Yeah, really. What model case is that? Looks like a lot of room in there!
Charles Barkley
"Poor People have been voting for Democrats for the last 50 years ... and they are still poor."
...
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
thanks man....like to keep it short and as simple as possible
http://www.supload.us/free/these_temps.JPG/view/
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
It's just a 3 year old Mountain Mods U2 UFO, great case for setting up water cooling. Expensive though.
oo nice to see you here sbrehm72255, or should I say Bio
Yeah, a U2-UFO is like a 'forever' case, once you get it you'll have it very long, but there's the price again... well, I'm saving for a Horizon
DFI ICFX3200 07/30 w/ MCW30
E6600 L632A407 w/ EK Supreme
Powercolor HD3870 w/ MCW60
OCZ Reaper 2x2GB CAS4
WD Caviar Black 1TB
Silverstone Strider 750W
MM U2-UFO Extended CYO
CPU & NB loop = PA120.3, DDC 18W w/ Petra's top, 7/16''
VGA loop = PA120.2, DDC 18W w/ Petra's top, 7/16''
10 fans on 7V, PX-750A, all on SM 930BF
" Having a DFI board is like having a hot girlfriend thats a total b1tch" ...
sbrehm72255 - where did you get that black mesh again?
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
Here is my TJ09.
IMHO you could have done it in a better way with much shorter tubes
Soon to be :
ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410
Used to be: SaFrOuT
Here is my TJ09.
I would have flipped the rad upside down so the barbs were on the bottom to make for shorter tubing..
I did the same thing when I did my 1st watercooling setup...live and learn...that was before I went to a lian-li v2000b and did everything internal...
btw...what pump are you using?
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
Would flipping the rad upside down affect the flow much? Seems like it would, but having seen a bunch of WCers with upside down rads, it probably doesn't, or at least, not enough to matter.
E6600 9.0 x 328.0 = 2.95
eVGA 680i
G.Skill 4x1GB 5-5-5-15
eVGA 8800GTX 576/900 (Work in progress)
Audigy2 ZS
Icemat Siberia
Scepter X20WG-1080P 20.1" widescreen LCD
I have done it with a swiftech rad and a thermochill with no problems at all..
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
not at all
Soon to be :
ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410
Used to be: SaFrOuT
I'm using the MCP655. As for the way I mounted it, I would have mounted it inside the case, inplace of the 2 120mm fan slots. But decided not to because there is a lot of heat coming off the board. I really didnt want my temps to be affected. And since the case already comes predrilled with 2 holes, there wasnt any need for me to mod. I did consider flipping it upside down and have one tube pass through the pci bracket but like I said I still would have to have drilled another hole.
All in all, I'm pretty happy with end result and thanks for the comments.
Last edited by Darkatom; 04-19-2007 at 05:36 PM.
nice to see you here, BHNothing really all that special here, but it works OK for me..........
*pictures edited out*
Thanks, nice to be here..........nice to see you here, BH
Just finished this week...
Pentium D 930 @ 4.0GHZ
Asus P5WD2 -E Premium
OCZ Gold EL DDR2 2x512mb
EVGA 6800GT 256mb PCI-E
Seagate 500gb SATA2
Western Digital 250gb SATA
Pretty nice lookin' there!Just finished this week...
Lenovo Thinkpad X220 - Core i5 2410m, 4gb
waiting on 28nm video cards...
This needs changing ASAP before summer.... Looking to get a lian li maybe, and water on the card.
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
hawkbizkit, that is nice, first setup?
and welcome to liquid cooling forums.
that looks like a Thermaltake case, if so, word of advice, plan on replacing them 80mm fans soon, they get noisy pretty quickly.
i have Xaser3, jigsawed front to fit 2 120mm fans and rear to fit 1 120mm fan.
and the top soon to fit 2more 120mm fans.
I see Grados and Senns.....
This needs changing ASAP before summer.... Looking to get a lian li maybe, and water on the card.
I BLEED TOXIC GREEN
Posting Permissions
Bookmarks