The DFI 965-s DARK wait thread.

[oshox]

I've had mine since last Thursday.
It's really sweet, and it's been performing awesome for me.
Using G.Skill 2GBHZ

[Okda]

I've had mine since last Thursday.
It's really sweet, and it's been performing awesome for me.
Using G.Skill 2GBHZ

results ?

[megatron]

results ?

http://www.xtremesystems.org/forums/...d.php?t=140951

[Raja@ASUS]

I have serious problem with this board. It is new, but not working, if i push the Power button, board is getting in endless restart loop ... no post, nothing, only restart after restart ...

It is normal and i am doing something wrong? Or RMA? I ve tested TWO memories, TWO CPUs, TWO GFX and the same result ...

remove all power from the board and clear the cmos, power back up, jumper bac k to normal, use a single stick of ram in the 3rd or forth slot and see if it will boot. On a cleared boot like this, the board should spin up for a couple of seconds, power down, spin up again, power down, and then boot up...

If it does boot set the vdimm up at 2-2.1v and save cmos, remove power from the board and insert the other stick of ram, try powering up again. If this does not work, see if you can try some different ram, try to avoid any ram that has been run with high vdimm for excessive periods, if using older stuff. Promos and elpida types use lower vdimm intrinsically, even micron d9 should boot at 1.9 if it has not been run hard for longer periods. Failing this the problem is either SPD related or you may need to rma the board..


regards
raja

[ziddey]

Anyone know of any heatsinks that'll cover the mosfets well, and push into the designed holes to secure, instead of having to adhere to mosfets themselves?

[nealh]

are HS on the mosfets absolutely necessary

waiting for newegg to get this back in stock..no way I am buying from ewiz

[ziddey]

No, otherwise DFI wouldn't have skimped out of them. But it does look like they had plans at some point in time for cooling, since they have holes around the area for mounting something. But I figure it wouldn't hurt. Guess there was some sort of communication difficulty with my attachments not making it or something, so the order never shipped. I ended up pulling the trigger from ewiz last night. Meh... guess it's another week or two of waiting. AHHH

[Nelly]

http://www.trend4pc.de/product_info....oducts_id/1100

New INFO from DFI-EU ->>> ETA ~ 4th.May.2007 !