New E6600 batches, post your Overclock

[sreedx2]

L632A896

lapped

watercooled

9x333 = 3000MHz @ 1.216v (1.200 with droop)

dual prime95 48 hours stable

Idle temps 29 cpu / 42 both cores
full load 39 cpu / 49 both cores

Could not get to 3600MHz even with 1.46 volts.

you could not reach 3.6 with 1.46V under load or bios ?

I assume you did not try any higher Vcore ?

this is my E6600 max stable 3.55 at 1.45v I try 3.6 with up to 1.57v and but no way can't make it stable

well atleast you can reach 3.55