but totally wasst of money the memorycoolers. But it looks nice
Asus Rampage II Gene - i7 920 D0 Lapped - Lapped Noctua NH12U-F
Sapphire HD4870 X2 - 6GB Corsair Dominator GT@T1 - Windows 7 x64
2 x WD Velociraptor 150GB Raid 0 - 500GB Samsung T166
Antec ThreeHundred - Samsung A656 40"- TX650W
CPU: i5 2500k @ 4.2ghz
RAM: g.skill 4gb ripjaws ddr3 1600
MOBO: ASUS P8P67 Deluxe
VID: HD6950 @ 850/1300 (for now)
SOUND: Auzen X-Fi Prelude
PSU: Seasonic X-560
HDD: Seagate 500gb :: Samsung 500gb SATAII :: Samsung 1tb
CASE: Antec P182 w/window
COOLING: Panaflo 120x38mm medium-speed 2x :: Panaflo 120x25mm medium/low :: Thermalright Venomous X/ Delta 120x38mm low-speed
Most teenagers (some adults, as well) have changed to decide that rap sounds musical. If you haven't, put this in your signature.
You cant use those mem coolers with 4gbs can you?
Last edited by Origin_Unknown; 04-07-2007 at 04:11 AM.
My P1 PhysX cooling mod:
Running near silent @ 6V ![]()
![]()
- DFI LANParty LT X38-T2R Rev. AA1
- Core 2 Duo E8500 @ 4009MHz, 1.31V
- TRUE @ 2x Scythe S-Flex SFF21F, 5V
- 4 x 2GB G.Skill Pi PC2-8800
- MSI R4870X2-T2D2G-OC
- 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
- Plextor PX-716SA/T3KB DVD-RW
- Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
- SilverStone OP700
- CM Stacker 830 Evo
- Eizo FlexScan HD2441W - Audioquest DV-X
- WinVista Ultimate 64bit SP1
- DFI LANParty LT X38-T2R Rev. AA1
- Core 2 Duo E8500 @ 4009MHz, 1.31V
- TRUE @ 2x Scythe S-Flex SFF21F, 5V
- 4 x 2GB G.Skill Pi PC2-8800
- MSI R4870X2-T2D2G-OC
- 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
- Plextor PX-716SA/T3KB DVD-RW
- Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
- SilverStone OP700
- CM Stacker 830 Evo
- Eizo FlexScan HD2441W - Audioquest DV-X
- WinVista Ultimate 64bit SP1
@Tommy_Hewitt, all that's missing are the HR-05 SLi for the SB, and the Ultra-120 Extreme for the proc...
I BLEED TOXIC GREEN
Hello, New member here. Got tired of Coolant Leaking after a meltdown. Went Passive.
http://www.xtremesystems.org/forums/...&postcount=749
![]()
ʇɐɥʇ ǝʞıl pɐǝɥ ɹnoʎ ƃuıuɹnʇ ǝq ʇ,uop
I think, that's not a good idea, cause then there would be no fan, which brings the hot air out of the case
, thx
So I installed two chip set coolers from thermaltake. WOW.
Dropped from 80 deg to 54.
The fans are controlled by the BIOS and are quiet.
The P5n-32 SLI 680i Runs very hot on the NB and SB. Wanted to fix the problem. This is an overkill solution!
Awesome!
ʇɐɥʇ ǝʞıl pɐǝɥ ɹnoʎ ƃuıuɹnʇ ǝq ʇ,uop
Brian: you're saying that your MB is a p5n32 then why does your MB have striker extreme printed on the PCB??
My Rig
CPU: Intel Core 2 Duo E6600 L626A175 3GHZ 1.30V real
RAM: Crucial Ballistix PC2-8500 stock speed and timings
Motherboard: Asus P5E X38 333MHZ FSB x9 multi
Video: Gigabyte 8800GTS 320mb stock speeds
Soundcard Creative Soundblaster Audigy 2 ZS
Hard Drives Seagate 250GB 7200.10 SATAII (boot) > Samsung HD501J 500GB SATAII (Storage)
Case: Lian Li PC-S80
Powersupply: Corsair HX620W 620watt
Optical: Samsung SH-S182D DVDRW 18x
Monitor: Asus MW221U 22" LCD
Mouse: Logitech CF G7
Keyboard: Logitech G15
Speakers: Logitech Z5500
The water cooling
CPU waterblock: Swiftech Apogee (original with custom top and mounting plate)
GPU waterblock: EK FC8800GTS Acrylic
Pump: Laing D5 Vario "3" speed setting
Radiator: Swiftech MCR220 w/ 120mm Yate Loons D12SM-12 running at 7V
Resevoir - Swiftech MCRES Micro - Pentison G11
Bookmarks