Abit Quad GT FSB 543 with E6300: Update FSB 553 1:1 Sync

[Misko]

....lol... I try for you my friend , but its tricky, only got this mobo for two days, no mods yet. When i can manage 550fsb on this Abit, its LN2 action.
There is a few vmods i have to do first, boot to win on 500fsb, then uguru up from there. Cooling is the key here, and lots of volt of course. Thik i need 2.0+vmch for higher fsb (550fsb+)

EDIT: Pic of spi32M@530fsb, 535 was no go. Will try later.

---cheers---

10x my friend very good result, I see yours xeon is also very good hope to see u soon on ln2

[LexLuther]

Hoho that's great result , congrats !!!

Give us vcore, vmch and cooling type(still water?).

vCore is up to just CPU. I had knew that GT need some more voltage because the 1066 strap give more Load than 1333 strap.

but it's not.

My vcore is 1.425v on 3.7. and 1.495v on FSB 553

vMCH is always 1.7v.

under vMch 1.7v, Could not start to XP. Cooling is also WaterChiller. temp -2 cellcious.

[LexLuther]

....lol... I try for you my friend , but its tricky, only got this mobo for two days, no mods yet. When i can manage 550fsb on this Abit, its LN2 action.
There is a few vmods i have to do first, boot to win on 500fsb, then uguru up from there. Cooling is the key here, and lots of volt of course. Thik i need 2.0+vmch for higher fsb (550fsb+)

EDIT: Pic of spi32M@530fsb, 535 was no go. Will try later.

---cheers---

Though it is hard to belive and apply this, it is useless to be suspicious.

and though somebody do not believe this, but I'm Ok.

just only the time after My Mobo had been working like this.

Be positive sir.

[littleBoy]

Great job!! Lex.
Go Go a higher fsb!!!
I want to see a sub-ramtiming.

[LexLuther]

Threads Merged.

no need to post every single incremental OC you do.
its nice and all, but no need to post every increment OC you do, with a whole new post.

Thank you very much for advice. ^^ very helpful.

and the process is right.

[LexLuther]

Guy(s), what voltages are you using to hit 540fsb? I have the same board and am wondering what settings to use. A list of all voltages would be greatly appreciated. Also, which BIOS you are using would be helpful

on FSB 553,

vcore : 1.495v
vdimm : 2.625v
vFsb : 1.5v
vmch : 1.7v
vICH : 1.2v
vICHIO : 1.7v actually everything is max value except vcore and vdimm.

and nothing moded.

ram timing is 4-4-4-12 trfc 30 and the others is basis on Mobo default.

No memset useing. just posting windows. Chiller setted to -2 cellcious.

and I ran Super pi on FSB 529, eventhough higher FSB is possible. for compare my older pi record on P5BD at same setting.

that's all.

and I added My Mobo Pic.


you can see CPU, North Bridge & Heatsink and active cooling for Digital PWM.


and you can see also North Bridge & South Bridge included My Cute X600 with VF-900 Cu.


finally, this is my WaterChiller contained Koolance Coolant and Hydo 40W inline/underwater Pump.

[dinos22]

is this on 1333 strap guys or is Abit also using 1067 strap up to 400MHz FSB



what about RAM dividers how do they function

how high can you clock the RAM


nice boards

[ziddey]

dinos, it's 1066 strap. no 1333 on abit qgt currently

[LexLuther]

is this on 1333 strap guys or is Abit also using 1067 strap up to 400MHz FSB



what about RAM dividers how do they function

how high can you clock the RAM


nice boards

QUAD GT is working only 533/800/1066 straps.

but there is "by CPU", too.

If the Cpu based onFSB1333 be retailed, or mod something Default FSB of CPU, then it maybe work on 1333Strap. but nobody knows that, yet.

[LexLuther]

dinos, it's 1066 strap. no 1333 on abit qgt currently

thank a lot Ziddey

[LexLuther]

is this on 1333 strap guys or is Abit also using 1067 strap up to 400MHz FSB



what about RAM dividers how do they function

how high can you clock the RAM


nice boards

memory frequency divider is 1 by 1. just Sync.

th memory frequency is 1106 on DDR2. right? yes.

[LexLuther]

Super PI shot added on FSB 540 with E6300.

I Hope that Faster than Coolarer's with Infinity P965

[nikolas61]

congtats

nice FSB

[Misko]

Awesome FSB

Temperatures on CPU&Nb are still -2C, and vmch also still 1.7V?

[LexLuther]

Awesome FSB

Temperatures on CPU&Nb are still -2C, and vmch also still 1.7V?

yes on that setting this is very stable.

it does need max vMCH on 1066 strap high FSB.

I'm setting up windows server 2003 for advanced Pi value now

[Misko]

10x for info , what do u think about max fsb for 32M run? Can u lower multi (if u can not change multi in BIOS with yours CPU, u can change it in win with crystalCPUID) on CPU and try 545, if it can't pass with default one? It would be very interesting info for me

[dinos22]

how high can you OC the RAM on 4:5 and 2:3 ratios with CAS4 and CAS5

[LexLuther]

Now I added FSB 540 with E6300 renewal.

memset info and CPUZ memory info has been evaporated. I don't know. ^^;

so I tell you, 4-4-4-3-5 3-23-2-10-9-2-8-4 on memset.

almost near to coolarer's Infinity 965P.

but now My OS is still XP SP2, so I have tuned something.

If I have some stable condition on SERVER2003, then I'll let you see better result. thankyou.

and I have no 6400 or 6600 C2D, so I can't let you know 2:3 or 4:5 setting on High Clock,

If you want to know 2:3 or 4:5 result on Low Clocks, then I'll show you that.

have a nice day. buddies.

[ziddey]

uncheck lock mchbar and see if it helps. you'd need to do that first time around though before it vanishes.

[Vapor]

I'm liking this board more and more....but I'm with Dinos: how well does it clock memory on 4:5 and 2:3 for you (cas 4, mostly)?

Also, how well does the 800 strap clock for you?

[LexLuther]

uncheck lock mchbar and see if it helps. you'd need to do that first time around though before it vanishes.

Thank you Ziddey ^^ very helpful I'l' try to do it on next time.
thanks again~

[LexLuther]

I'm liking this board more and more....but I'm with Dinos: how well does it clock memory on 4:5 and 2:3 for you (cas 4, mostly)?

Also, how well does the 800 strap clock for you?

My Memory is not so good now...
so I want to test for you say, too.
but I'm not ready to do it.
I'm searching what is the nice memory.
sooner I try to do it you said. thank you for your concern.

[dinos22]

My Memory is not so good now...
so I want to test for you say, too.
but I'm not ready to do it.
I'm searching what is the nice memory.
sooner I try to do it you said. thank you for your concern.

that is not important

what is important is that 4:5 and 2:3 clock the RAM similar.............since you have done 540MHz with RAM with decent timings you should be able to do those clocks and better with those ratios

reason i ask for CAS5 as well is to see whether the board can manage really high MHz but if your RAM isn't capable it doesn't matter



i found out that the RAM subtimings on this board are not available through bios which is a real shame >>> knowing Abit it will take a long time if ever for them to listen to end users and introduce things like that in the bios

[Gautam]

t
i found out that the RAM subtimings on this board are not available through bios which is a real shame >>> knowing Abit it will take a long time if ever for them to listen to end users and introduce things like that in the bios

Virtually its only shortcoming. :-/

[dinos22]

Virtually its only shortcoming. :-/

not sure i understand the message here