Asus P5N-E SLI small review

[lionheart]

I had to use 1.7v for vcmh to get to 500mhz fsb or over. Under 500fsb I could use 1.568v. I have an HR-05 SLI on my NB though, stock it would overheat and be very unstable with 1.568v. I have 1.45v selected for my cpu and 2.35v for ram. I have done a vdroop mod and that helped my stability greatly. Anything else?

Oke very well. I will set to 1.7v for vcmh. I used an 8x8 fan for NB. Are you think that is oke for NB? I have done a vdrood mod too, it is increased 0.02v in cpuz but when I have 1.500v selected for my cpu and run SP2004 stress cpu it is only 1.47 (