Evaporator Gallery

[quintus]

nice nice thx for that but hardly i can take them out of country. I will try dhl cause at the postoficce the police duanna man shake my hand hard and said no to me! i will send them for sure somehow and u may know the performance.
regards,
q

[Ssilencer]

Last batch of evaps



Try this at home...

[Blaster]

havent had much time to make evaps

but, latest rev3 modded to fit vapo enclosure









..next, is a g card evap

[LukeXE]

Last batch of evaps



Try this at home...

Wow, that`s very nice. Suction is solid with evap ?

[MaxxxRacer]

I think that is actaully the cap tube. notice the large opening at the top of the block. I believe that the suction line will be brazed to that, having the cap line inside of the suction line.

[epion2985]

I think that is actaully the cap tube. notice the large opening at the top of the block. I believe that the suction line will be brazed to that, having the cap line inside of the suction line.

lol, that is the suction line, or the begining of it anyway, then the flex line will be brazed on to it to continue it. I dont know about the capillary being inside though, I think it has been extablished that coiling it around the outside of the suction line reaps better results since even though its not as cold outside you get the whole line cooled rather then just a part of it when it is inside.

[jinu117]

Cap being inside works eqaully as good... :P Besides, who said you can wrap rest of cap outside once it comes out

[Ssilencer]

Wow, that`s very nice. Suction is solid with evap ?

that is for braze a bigger piece of cap tube there, then you can braze the cap tube you want and send it inside or outside the suction hose, you can see how it looks in this pic


the idea is to make it easier to change or even braze the cap tube.
he suction hose has to be brazed on the top of the evap
the evap has an upper chamber.
And yes, is all one piece.

Also LukeXE see the size compared with a cigarrette, if that was to braze the suction line hose, it has to be some weird little thin flex hose

[Haar]

http://www.xtremesystems.org/forums/...ad.php?t=78496

[Ssilencer]

Latest enclosures

[ayrtonsenna]

love those enclosures.

[AMAN]

hello! here my pioneering evap :



your opinion?

[Jort]

very handmade

nicely polished bottom

[Unseen]

how many hours for that?? I think it will work ok

[AMAN]

Operating time approximately 5-6h. I love work ) And the machine tool near at hand was not.

[Revv23]

wow, that looks like something i would have done aman.

*on to my next ghetto project*

No but seriously, it looks like it will work well, good job.

[JT from Russia]

my evap
http://img222.imageshack.us/img222/6600/11fg3.jpg
http://img222.imageshack.us/img222/2379/18vc5.jpg
http://img222.imageshack.us/img222/5316/70jz.jpg

I sell

[Burn]

Quick question, on those spiral evaps, what tool on the lathe is used to go that deep to cut the spirals? It looks like a deep thread, but nothing on the lathe I've used has the capability to go that deep.

[Blaster]

new cascade evap and his litle brother for singles, its the rev 4

base will still be machined to 2,5mm after soldering

the small one is 3cms tall, cap tube is brazed to mid where there is a 5mm diameter hole from top to base. 4 holes in base provide refrigerant to spiral that is 2x12mm wide

spiral doesnt look 2mm wide cause when machining to final diameter it creates an edge that im not removing

[MeltedDuron]

omg wow! I wanna see some numbers, that evap is a monster, great work yet again blaster

[Rubiconx3]

Nice evaps guys. Now if i wanted to purcahse one of these and like a mounting would someone be willing to sell? (pm me )

[AMAN]

Blaster Good evap. At assembly, channels become forged the deposit, a dirt?

[[XC] mysticmerlin]

Here's mine. First attempt. Hope it does good.

[Jort]

can the attachments be fixed of the evap's?

a friend want's to know how a prommy evap is on the inside...

tnx

[Dimas]

some photos of the complete Kit V4.1 with vga enclosure









waiting for the new V5 on september *)